Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

MS15-044: Vulnerabilities in Microsoft font drivers could allow remote code execution: May 12, 2015


View products that this article applies to.

This security update resolves vulnerabilities in Windows, the Microsoft .NET Framework, Microsoft Office, Microsoft Lync, and Microsoft Silverlight. The most severe of these vulnerabilities could allow remote code execution if a user opens a specially crafted document or goes to an untrusted webpage that contains embedded TrueType fonts.

↑ Back to the top


Introduction

Microsoft has released security bulletin MS15-044. To learn more about this security bulletin:

How to obtain help and support for this security update

Help installing updates:
Support for Microsoft Update

Security solutions for IT professionals:
TechNet Security Troubleshooting and Support

Help protect your Windows-based computer from viruses and malware:
Virus Solution and Security Center

Local support according to your country: International support

↑ Back to the top


More information about this security update

The following articles contain additional information about this security update as it relates to individual product versions. The articles may contain known issue information. If this is the case, the known issue is listed under each article link.
Article number Article title
3045171 MS15-044 and MS15-051: Description of the security update for Windows font drivers
3057781 MS15-044: Description of the security update for the .NET Framework 4.6 RC on Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2: May 12, 2015
3048077 MS15-044: Description of the security update for the .NET Framework 4.5, 4.5.1, and 4.5.2 on Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2: May 12, 2015
3048074 MS15-044: Description of the security update for the .NET Framework 4 on Windows Server 2003, Windows Vista, and Windows Server 2008: May 12, 2015
3048070 MS15-044: Description of the security update for the .NET Framework 3.5.1 on Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1: May 12, 2015
3048072 MS15-044: Description of the security update for the .NET Framework 3.5 on Windows 8.1 and Windows Server 2012 R2: May 12, 2015
3048071 MS15-044: Description of the security update for the .NET Framework 3.5 on Windows 8 and Windows Server 2012: May 12, 2015
3048068 MS15-044: Description of the security update for the .NET Framework 3.0 Service Pack 2 on Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2: May 12, 2015
3048073 MS15-044: Description of the security update for the .NET Framework 3.0 Service Pack 2 on Windows Server 2003: May 12, 2015
3039779 MS15-044: Description of the security update for Lync 2013 (Skype for Business): May 12, 2015
3056819 MS15-044: Description of the security update for Silverlight 5: May 12, 2015
2881073 MS15-044: Description of the security update for Microsoft Office 2010 Service Pack 2
2883029 MS15-044: Description of the security update for the 2007 Microsoft Office suite Service Pack 3
3051464 MS15-044: Description of the security update for Lync 2010: May 12, 2015
3051467 MS15-044: Description of the security update for Live Meeting Console: May 12, 2015
3051465 MS15-044: Description of the security update for Lync 2010 Attendee (user-level installation): May 12, 2015
3051466 MS15-044: Description of the security update for Lync 2010 Attendee (admin-level installation): May 12, 2015
3045171 MS15-044 and MS15-051: Description of the security update for Windows font drivers


Known issues in security update 3045171:



  • After you install this security update (3045171), you experience crashes when you use Windows GDI+ to create text outline-based path objects on a computer that's running Windows 7 or an earlier version of Windows.

    To resolve this problem, install update 3065979. For more information, click the following article number to go to the article in the Microsoft Knowledge Base:
    3065979 "GsDraw error (1): GenericError" error occurs and application crashes when you create text outline in Windows
  • After you install this security update on a computer that's running Windows Vista or Windows Server 2008, you may receive an error message that resembles the following for the FontCache service in the Services Microsoft Management Console (MMC):

    Failed to Read Description. Error Code: 15100

    When you open the FontCache service in the Services MMC, you may receive an error message that resembles the following:

    Configuration Manager: A general error occurred

    The resource loader failed to find MUI file

    To resolve this problem, install update 971512. For more information, click the following article number to go to the article in the Microsoft Knowledge Base:
    971512 Description of the Windows Graphics, Imaging, and XPS Library
Security update deployment information

Windows Server 2003 (all editions)

Reference Table

The following table contains the security update information for this software.
Security update file namesFor all supported 32-bit editions of Windows Server 2003:
WindowsServer2003-KB3045171-x86-ENU.exe

For the Microsoft .NET Framework 3.0 Service Pack 2 when it is installed on all supported 32-bit editions of Windows Server 2003:
NDP30SP2-KB3048073-x86.exe

For the Microsoft .NET Framework 4 when it is installed on all supported 32-bit editions of Windows Server 2003:
NDP40-KB3048074-x86.exe

For all supported x64-based editions of Windows Server 2003:
WindowsServer2003-KB3045171-x64-ENU.exe

For the Microsoft .NET Framework 3.0 Service Pack 2 when it is installed on all supported x64-based editions of Windows Server 2003:
NDP30SP2-KB3048073-x64.exe

For the Microsoft .NET Framework 4 when it is installed on all supported x64-based editions of Windows Server 2003:
NDP40-KB3048074-x64.exe

For all supported Itanium-based editions of Windows Server 2003:
WindowsServer2003-KB3045171-ia64-ENU.exe
Installation switchesFor Microsoft Windows, see Microsoft Knowledge Base Article 934307

For the Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Update Log FileFor Windows Server 2003:
KB3045171.log

For the Microsoft .NET Framework 3.0 Service Pack 2:
Microsoft .NET Framework 3.0-KB3048073_*-msi0.txt
Microsoft .NET Framework 3.0-KB3048073_*.html

For the Microsoft .NET Framework 4:
KB3048074_*_*-Microsoft .NET Framework 4 Client Profile-MSP0.txt
KB3048074_*_*.html
Restart requirementFor Windows Server 2003:
Yes, you must restart your system after you apply this security update.

For the Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, you receive a message that advises you to restart.
Removal informationFor Windows Server 2003:
Use Add or Remove Programs item in Control Panel or the Spuninst.exe utility located in the %Windir%\$NTUninstallKB3045171$\Spuninst folder

For the Microsoft .NET Framework:
Click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.
File informationSee Microsoft Knowledge Base Article 3045171
See Microsoft Knowledge Base Article 3048073
See Microsoft Knowledge Base Article 3048074
Registry key verificationFor Windows Server 2003:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP3\KB3045171\Filelist

For the Microsoft .NET Framework 3.0 Service Pack 2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 3.0 Service Pack 2\SP2\KB3048073
"ThisVersionInstalled" = "Y"

For the Microsoft .NET Framework 4 when it is installed on all supported 32-bit editions of Windows Server 2003:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3048074
"ThisVersionInstalled" = "Y"

For the Microsoft .NET Framework 4 when it is installed on all supported x64-based editions of Windows Server 2003:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3048074
"ThisVersionInstalled" = "Y"

Windows Vista (all editions)

Reference Table

The following table contains the security update information for this software.
Security update file namesFor all supported 32-bit editions of Windows Vista:
Windows6.0-KB3045171-x86.msu

For the Microsoft .NET Framework 3.0 Service Pack 2 when it is installed on all supported 32-bit editions of Windows Server 2003:
NDP30SP2-KB3048068-x86.exe

For the Microsoft .NET Framework 4 when it is installed on all supported 32-bit editions of Windows Vista:
NDP40-KB3048074-x86.exe

For the Microsoft .NET Framework 4.5/4.5.1/4.5.2 when it is installed on all supported 32-bit editions of Windows Vista:
NDP45-KB3048077-x86.exe

For all supported x64-based editions of Windows Vista:
Windows6.0-KB3045171-x64.msu

For the Microsoft .NET Framework 3.0 Service Pack 2 when it is installed on all supported x64-based editions of Windows Server 2003:
NDP30SP2-KB3048068-x64.exe

For the Microsoft .NET Framework 4 when it is installed on all supported x64-based editions of Windows Vista:
NDP40-KB3048074-x64.exe

For the Microsoft .NET Framework 4.5/4.5.1/4.5.2 when it is installed on all supported x64-based editions of Windows Vista:
NDP45-KB3048077-x64.exe
Installation switchesFor Microsoft Windows, see Microsoft Knowledge Base Article 934307

For the Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Update log fileFor Windows Vista:
Not applicable

For the Microsoft .NET Framework 3.0 Service Pack 2:
Microsoft .NET Framework 3.0-KB3048068_*-msi0.txt
Microsoft .NET Framework 3.0-KB3048068_*.html

For the Microsoft .NET Framework 4:
KB3048074_*_*-Microsoft .NET Framework 4 Client Profile-MSP0.txt
KB3048074_*_*.html

For the Microsoft .NET Framework 4.5/4.5.1/4.5.2:
KB3048077_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3048077_*_*.html
Restart requirementFor Windows Vista:
Yes, you must restart your system after you apply this security update.

For the Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, you receive a message that advises you to restart.
Removal informationFor Windows Vista:
WUSA.exe does not support uninstall of updates. To uninstall an update installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.

For the Microsoft .NET Framework:
Click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.
File informationSee Microsoft Knowledge Base Article 3045171
See Microsoft Knowledge Base Article 3048068
See Microsoft Knowledge Base Article 3048074
See Microsoft Knowledge Base Article 3048077
Registry key verificationFor Windows Vista:
A registry key does not exist to validate the presence of this update.

For the Microsoft .NET Framework 3.0 Service Pack 2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 3.0 Service Pack 2\SP2\KB3048068
"ThisVersionInstalled" = "Y"

For the Microsoft .NET Framework 4 when it is installed on all supported 32-bit editions of Windows Vista:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3048074
"ThisVersionInstalled" = "Y"

For the Microsoft .NET Framework 4 when it is installed on all supported x64-based editions of Windows Vista:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3048074
"ThisVersionInstalled" = "Y"

For the Microsoft .NET Framework 4.5/4.5.1/4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB3048077
"ThisVersionInstalled" = "Y"

Windows Server 2008 (all editions)

Reference Table

The following table contains the security update information for this software.
Security update file namesFor all supported 32-bit editions of Windows Server 2008:
Windows6.0-KB3045171-x86.msu

For the Microsoft .NET Framework 3.0 Service Pack 2 on Windows Server 2008 for 32-bit Systems Service Pack 2:
Windows6.0-KB3048068-x86.msu

For the Microsoft .NET Framework 4 when it is installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP40-KB3048074-x86.exe

For the Microsoft .NET Framework 4.5/4.5.1/4.5.2 when it is installed on all supported 32-bit editions of Windows Server 2008 Service Pack 2:
NDP45-KB3048077-x86.exe

For all supported x64-based editions of Windows Server 2008:
Windows6.0-KB3045171-x64.msu

For the Microsoft .NET Framework 3.0 Service Pack 2 on Windows Server 2008 for x64-based Systems Service Pack 2:
Windows6.0-KB3048068-x64.msu

For the Microsoft .NET Framework 4 when it is installed on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP40-KB3048074-x64.exe

For the Microsoft .NET Framework 4.5/4.5.1/4.5.2 on all supported x64-based editions of Windows Server 2008 Service Pack 2:
NDP45-KB3048077-x64.exe

For all supported Itanium-based editions of Windows Server 2008:
Windows6.0-KB3045171-ia64.msu
Installation switchesFor Microsoft Windows, see Microsoft Knowledge Base Article 934307

For the Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Update log fileFor Windows Server 2008:
Not applicable

For the Microsoft .NET Framework 3.0 Service Pack 2:
Microsoft .NET Framework 3.0-KB3048068_*-msi0.txt
Microsoft .NET Framework 3.0-KB3048068_*.html

For the Microsoft .NET Framework 4:
KB3048074_*_*-Microsoft .NET Framework 4 Client Profile-MSP0.txt
KB3048074_*_*.html

For the Microsoft .NET Framework 4.5/4.5.1/4.5.2:
KB3048077_*_*-Microsoft .NET Framework [.NET target version]-MSP0.txt
KB3048077_*_*.html
Restart requirementFor Windows Server 2008:
Yes, you must restart your system after you apply this security update.

For the Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, you receive a message that advises you to restart.
Removal informationFor Windows Server 2008:
WUSA.exe does not support uninstall of updates. To uninstall an update installed by WUSA, click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.

For the Microsoft .NET Framework:
Click Control Panel, and then click Security. Under Windows Update, click View installed updates and select from the list of updates.
File informationSee Microsoft Knowledge Base Article 3045171
See Microsoft Knowledge Base Article 3048068
See Microsoft Knowledge Base Article 3048074
See Microsoft Knowledge Base Article 3048077
Registry key verificationFor Windows Server 2008:
A registry key does not exist to validate the presence of this update.

For the Microsoft .NET Framework 3.0 Service Pack 2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 3.0 Service Pack 2\SP2\KB3048068
"ThisVersionInstalled" = "Y"

For the Microsoft .NET Framework 4 when it is installed on all supported 32-bit editions of Windows Server 2008:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3048074
"ThisVersionInstalled" = "Y"

For the Microsoft .NET Framework 4 when it is installed on all supported x64-based editions of Windows Server 2008:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3048074
"ThisVersionInstalled" = "Y"

For the Microsoft .NET Framework 4.5/4.5.1/4.5.2:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework [.NET target version]\KB3048077
"ThisVersionInstalled" = "Y"

Windows 7 (all editions)

Reference Table

The following table contains the security update information for this software.
Security update file nameFor all supported 32-bit editions of Windows 7:
Windows6.1-KB3045171-x86.msu

For the Microsoft .NET Framework 3.5.1 on all supported 32-bit editions of Windows 7 Service Pack 1:
Windows6.1-KB3048070-x86.msu

For the Microsoft .NET Framework 4 when it is installed on all supported 32-bit editions of Windows 7 Service Pack 1:
NDP40-KB3048074-x86.exe

For all supported x64-based editions of Windows 7:
Windows6.1-KB3045171-x64.msu

For the Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows 7 Service Pack 1:
Windows6.1-KB3048070-x64.msu

For the Microsoft .NET Framework 4 when it is installed on all supported x64-based editions of Windows 7 Service Pack 1:
NDP40-KB3048074-x64.exe
Installation switchesFor Microsoft Windows, see Microsoft Knowledge Base Article 934307

For the Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Update log fileFor Windows 7:
Not applicable

For the Microsoft .NET Framework 3.5.1:
Not applicable.

For the Microsoft .NET Framework 4:
KB3048074_*_*-Microsoft .NET Framework 4 Client Profile-MSP0.txt
KB3048074_*_*.html
Restart requirementFor Windows 7:
Yes, you must restart your system after you apply this security update.

For the Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, you receive a message that advises you to restart.
Removal informationFor Windows 7:
To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.

For the Microsoft .NET Framework:
Click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.
File informationSee Microsoft Knowledge Base Article 3045171
See Microsoft Knowledge Base Article 3048070
See Microsoft Knowledge Base Article 3048074
Registry key verificationFor Windows 7:
A registry key does not exist to validate the presence of this update.

For the Microsoft .NET Framework 3.5.1:

A registry key does not exist to validate the presence of this update. Use WMI to detect for the presence of this update.

For the Microsoft .NET Framework 4 when it is installed on all supported 32-bit editions of Windows 7:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3048074
"ThisVersionInstalled" = "Y"

For the Microsoft .NET Framework 4 when it is installed on all supported x64-based editions of Windows 7:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3048074
"ThisVersionInstalled" = "Y"

Windows Server 2008 R2 (all editions)

Reference Table

The following table contains the security update information for this software.
Security update file nameFor all supported x64-based editions of Windows Server 2008 R2:
Windows6.1-KB3045171-x64.msu

For the Microsoft .NET Framework 3.5.1 on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
Windows6.1-KB3048070-x64.msu

For the Microsoft .NET Framework 4 when it is installed on all supported x64-based editions of Windows Server 2008 R2 Service Pack 1:
NDP40-KB3048074-x64.exe

For all supported Itanium-based editions of Windows Server 2008 R2:
Windows6.1-KB3045171-ia64.msu
Installation switchesFor Microsoft Windows, see Microsoft Knowledge Base Article 934307

For the Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Update log fileFor Windows Server 2008 R2:
Not applicable

For the Microsoft .NET Framework 3.5.1:
Not applicable

For the Microsoft .NET Framework 4:
KB3048074_*_*-Microsoft .NET Framework 4 Client Profile-MSP0.txt
KB3048074_*_*.html
Restart requirementFor Windows Server 2008 R2:
Yes, you must restart your system after you apply this security update.

For the Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, you receive a message that advises you to restart.
Removal informationFor Windows Server 2008 R2:
To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.

For the Microsoft .NET Framework:
Click Control Panel, click System and Security, and then under Windows Update, click View installed updates and select from the list of updates.
File informationSee Microsoft Knowledge Base Article 3045171
See Microsoft Knowledge Base Article 3048070
See Microsoft Knowledge Base Article 3048074
Registry key verificationFor Windows Server 2008 R2:
A registry key does not exist to validate the presence of this update.

For the Microsoft .NET Framework 3.5.1:
A registry key does not exist to validate the presence of this update. Use WMI to detect for the presence of this update.

For the Microsoft .NET Framework 4:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Updates\Microsoft .NET Framework 4 Client Profile\KB3048074
"ThisVersionInstalled" = "Y"

Windows 8 and Windows 8.1 (all editions)

Reference Table

The following table contains the security update information for this software.
Security update file nameFor all supported 32-bit editions of Windows 8:
Windows8-RT-KB3045171-x86.msu

For the Microsoft .NET Framework 3.5 on Windows 8 for 32-bit Systems:
Windows8-RT-KB3048071-x86.msu

For all supported x64-based editions of Windows 8:
Windows8-RT-KB3045171-x64.msu

For the Microsoft .NET Framework 3.5 on Windows 8 for x64-based Systems:
Windows8-RT-KB3048071-x64.msu

For all supported 32-bit editions of Windows 8.1:
Windows8.1-KB3045171-x86.msu

For the Microsoft .NET Framework 3.5 on Windows 8.1 for 32-bit Systems:
Windows8.1-KB3048072-x86.msu

For all supported x64-based editions of Windows 8.1:
Windows8.1-KB3045171-x64.msu

For the Microsoft .NET Framework 3.5 on Windows 8.1 for x64-based Systems:
Windows8.1-KB3048072-x64.msu
Installation switchesFor Microsoft Windows, see Microsoft Knowledge Base Article 934307

For the Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Restart requirementFor Windows 8 and Windows 8.1:
Yes, you must restart your system after you apply this security update.

For the Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, you receive a message that advises you to restart.
Removal informationFor Windows 8 and Windows 8.1:
To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, click Windows Update, and then under See also, click Installed updates and select from the list of updates.

For the Microsoft .NET Framework:
Click Control Panel, click System and Security, and then under Windows Update, click View update history and select from the list of updates.
File informationSee Microsoft Knowledge Base Article 3045171
See Microsoft Knowledge Base Article 3048071
See Microsoft Knowledge Base Article 3048074
Registry key verificationRegistry keys do not exist to validate the presence of these updates.

Windows Server 2012 and Windows Server 2012 R2 (all editions)

Reference Table

The following table contains the security update information for this software.
Security update file nameFor all supported editions of Windows Server 2012:
Windows8-RT-KB3045171-x64.msu

For the Microsoft .NET Framework 3.5 on Windows Server 2012:
Windows8-RT-KB3048071-x64.msu

For all supported editions of Windows Server 2012 R2:
Windows8.1-KB3045171-x64.msu

For the Microsoft .NET Framework 3.5 on Windows Server 2012 R2:
Windows8.1-KB3048072-x64.msu
Installation switchesFor Microsoft Windows, see Microsoft Knowledge Base Article 934307

For the Microsoft .NET Framework, see Microsoft Knowledge Base Article 2844699
Restart requirementFor Windows Server 2012 and Windows Server 2012 R2:
Yes, you must restart your system after you apply this security update.

For the Microsoft .NET Framework:
This update does not require a restart. The installer stops the required services, applies the update, and then restarts the services. However, if the required services cannot be stopped for any reason, or if required files are being used, this update will require a restart. If this behavior occurs, you receive a message that advises you to restart.
Removal informationFor Windows Server 2012 and Windows Server 2012 R2:
To uninstall an update installed by WUSA, use the /Uninstall setup switch or click Control Panel, click System and Security, click Windows Update, and then under See also, click Installed updates and select from the list of updates.

For the Microsoft .NET Framework:
Click Control Panel, click System and Security, and then under Windows Update, click View update history and select from the list of updates.
File informationSee Microsoft Knowledge Base Article 3045171
See Microsoft Knowledge Base Article 3048071
See Microsoft Knowledge Base Article 3048074
Registry key verificationRegistry keys do not exist to validate the presence of these updates.

Windows RT and Windows RT 8.1 (all editions)

Reference Table

The following table contains the security update information for this software.
DeploymentThe 3045171 update is available through Windows Update only.
Restart RequirementYes, you must restart your system after you apply this security update.
Removal InformationClick Control Panel, click System and Security, click Windows Update, and then under See also, click Installed updates and select from the list of updates.
File InformationSee Microsoft Knowledge Base Article 3045171

The 2007 Microsoft Office suite (all editions)

Reference Table

The following table contains the security update information for this software.
Security update file nameFor all supported editions of the 2007 Microsoft Office suite:
ogl2007-kb2883029-fullfile-x86-glb.exe
Installation switchesSee Microsoft Knowledge Base Article 912203
Restart requirementIn some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, you receive a message that advises you to restart.

To help reduce the possibility that a restart will be required, stop all affected services and close all applications that may use the affected files before you install the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Removal informationUse Add or Remove Programs item in Control Panel.
File informationSee Microsoft Knowledge Base Article 2883029
Registry key verificationNot applicable

Microsoft Office 2010 (all editions)

Reference Table

The following table contains the security update information for this software.
Security update file nameFor all supported editions of Microsoft Office 2010 (32-bit editions):
ogl2010-kb2881073-fullfile-x86-glb.exe
For all supported editions of Microsoft Office 2010 (64-bit editions):
ogl2010-kb2881073-fullfile-x64-glb.exe
Installation switchesSee Microsoft Knowledge Base Article 912203
Restart requirementIn some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, you receive a message that advises you to restart.

To help reduce the possibility that a restart will be required, stop all affected services and close all applications that may use the affected files before you install the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Removal informationUse Add or Remove Programs item in Control Panel.
File informationSee Microsoft Knowledge Base Article 2881073
Registry key verificationNot applicable

Microsoft Live Meeting 2007, Microsoft Lync 2010, Microsoft Lync 2010 Attendee, Microsoft Lync 2013 (Skype for Business), and Microsoft Lync Basic 2013 (Skype for Business Basic)

Reference Table

The following table contains the security update information for this software.
Security update file nameFor Microsoft Live Meeting 2007 Console (3051467):
LMSetup.exe

For Microsoft Lync 2010 (32-bit) (3051464):
lync.msp
For Microsoft Lync 2010 (64-bit) (3051464):
lync.msp

For Microsoft Lync 2010 Attendee (user level install) (3051465):
AttendeeUser.msp

For Microsoft Lync 2010 Attendee (admin level install) (3051466):
AttendeeAdmin.msp

For all supported editions of Microsoft Lync 2013 (Skype for Business) (32-bit) and Microsoft Lync Basic 2013 (Skype for Business Basic) (32-bit):
lyncmso2013-kb3039779-fullfile-x86-glb.exe

For all supported editions of Microsoft Lync 2013 (Skype for Business) (64-bit) and Microsoft Lync Basic 2013 (Skype for Business Basic) (64-bit):
lyncmso2013-kb3039779-fullfile-x64-glb.exe
Installation switchesSee Microsoft Knowledge Base Article 912203
Restart requirementIn some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, you receive a message that advises you to restart.

To help reduce the possibility that a restart will be required, stop all affected services and close all applications that may use the affected files before you install the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Removal InformationUse Add or Remove Programs item in Control Panel.
File InformationFor Microsoft Live Meeting 2007 Console:
See Microsoft Knowledge Base Article 3051467

For all supported editions of Microsoft Lync 2010:
See Microsoft Knowledge Base Article 3051464

For Microsoft Lync 2010 Attendee (user level install):
See Microsoft Knowledge Base Article 3051465

For Microsoft Lync 2010 Attendee (admin level install):
See Microsoft Knowledge Base Article 3051466

For Microsoft Link 2013 (Skype for Business) and Microsoft Link Basic 2013 (Skype for Business Basic):
See Microsoft Knowledge Base Article 3039779
Registry Key VerificationFor Microsoft Live Meeting 2007 Console:
Not applicable

For Microsoft Lync 2010 (32-bit):
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components\{0EEB34F6-991D-4a1b-8EEB-772DA0EADB22}
Version = 7577.4461

For Microsoft Lync 2010 (64-bit):
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Active Setup\Installed Components\{0EEB34F6-991D-4a1b-8EEB-772DA0EADB22}
Version = 7577.4461

For Microsoft Lync 2010 Attendee (admin level install):
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\94E53390F8C13794999249B19E6CFE33\InstallProperties\DisplayVersion = 4.0.7577.4461

For Microsoft Lync 2010 Attendee (user level install):
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components\{0EEB34F6-991D-4a1b-8EEB-772DA0EADB22}
Version = 7577.4461

For Microsoft Lync 2013 (Skype for Business) and Microsoft Lync Basic 2013 (Skype for Business Basic):
Not applicable

Silverlight 5 for Mac (all editions)

Reference Table

The following table contains the security update information for this software.
Security update file namesFor Microsoft Silverlight 5 when it is installed on Mac:
Silverlight.dmg

For Microsoft Silverlight 5 Developer Runtime when it is installed on Mac:
silverlight_developer.dmg
Restart requirementThis update does not require a restart.
Removal informationOpen the Finder, select the system drive, go to the folder Internet Plug-ins - Library, and delete the file, Silverlight.Plugin. (Be aware that the update cannot be removed without removing the Silverlight plug-in.)
File informationSee Microsoft Knowledge Base Article 3056819
Installation verificationSee the Update FAQ section in this bulletin that addresses the question, "How do I know which version and build of Microsoft Silverlight is currently installed?"

Silverlight 5 for Windows (all supported releases)

Reference Table

The following table contains the security update information for this software.
Security update file namesFor Microsoft Silverlight 5 when it is installed on all supported 32-bit releases of Microsoft Windows:
silverlight.exe

For Microsoft Silverlight 5 Developer Runtime when it is installed on all supported 32-bit releases of Microsoft Windows:
silverlight_developer.exe

For Microsoft Silverlight 5 when it is installed on all supported 64-bit releases of Microsoft Windows:
silverlight_x64.exe

For Microsoft Silverlight 5 Developer Runtime when it is installed on all supported 64-bit releases of Microsoft Windows:
silverlight_developer_x64.exe
Installation switchesSee the Silverlight Enterprise Deployment Guide
Restart requirementThis update does not require a restart.
Removal informationUse Add or Remove Programs item in Control Panel. (Be aware that the update cannot be removed without removing Silverlight.)
File informationSee Microsoft Knowledge Base Article 3056819
Registry key verificationFor 32-bit installations of Microsoft Silverlight 5:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Silverlight "Version" = "5.1.40416.0"

For 64-bit installations of Microsoft Silverlight 5:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Silverlight "Version" = "5.1.40416.0"
and
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Silverlight "Version" = "5.1.40416.0"

↑ Back to the top


File hash information
File nameSHA1 hashSHA256 hash
AttendeeAdmin.msp2999EBE3BE5C170865BF922C654D620D3570337C6D15C1325AEA6CD646DFAE4BB8D53F3C416F32FF036B147D41488D1A6B995718
AttendeeUser.mspE5EE74DAF0A15BD59F715C2E4EC1E7296C802B2F27AE0D9A15C458616B3D79474AA64F65661EBA79B8E7F17AA3E1C2D7572574CC
LMSetup.exe480EF9104846E519F72D0BF9563204303CE41D574C4A0ED3C8C7F0197442D810242B3419E07B9884CC313AD7A95EB298DD96D303
Lync.msp1D3C5CDEB8B4AB1FBAC5CF9CF4027A3849EAC6F397A51BAEA47FBB579E7BFC34B7DA5DCCCA24136022A3F83B38AD2F435823CCA4
Lync.mspCF60FB77B479419E53F24ADDC22BD18487D870BF649D7371DE6714265B47E766D044E3283E80D7D8F9AACE355641E6C56DF998BE
MSIPatchRegFix-AMD64.exe5011CB29B096FB674A4795EE8FC2F7FDAD33863ABA62C33DD90ECC3C945AE4F52EEEB2FA07D2C53FB975263B483D09D80F02230D
MSIPatchRegFix-IA64.exeCB861EAF1F4CDFFAD5F83604C7250CD9EDD9643361867793FC7556B79E5833CC18F493A5611EDE94E0D944575E89BAA76B223A0D
MSIPatchRegFix-X86.exe94A84B80B8B45A1AC53A0E5D085513DA0F099655C83C5EE1D4FBFF5260A7D984471EAF4C6004431C21B4F661018BDB92CC124290
NDP30SP2-KB3048073-v2-x64.exe1A5ADC95208707AD71662A9D638DDB8D9D2C834772F291FD083BFE3EC0665AA9BDE4880F2E436DBFD52AED70E5A49BCA5E43052B
NDP30SP2-KB3048073-v2-x86.exe135DBF853E180A15B46D607732426656DEFDFC229F9155D22AFCFAE1B7F918336466CEF27B656783830765EAA19F1EF09188794A
NDP30SP2-KB3048073-x64.exe4343652F9F695032332145685B8FDBBC2CDCB407175310CBBA79109FA64E02EA882740BFDCA51EE95E7E28750B61518DC02287D5
NDP30SP2-KB3048073-x86.exe06945624AB8DFC41F8FD737FDBB2EE7C0A3DC6C2BB8F4E6528AEB69E556EBEA5DF7A61F48AB61018E05C37076C9B9664D06D7845
NDP40-KB3048074-IA64.exe563820C625F783D80B406B2732B65EBAE0F66F1676C77B8AC0975E5CA1394832A68B9CEB34E43424C68E207BB965376A24FE0102
NDP40-KB3048074-x64.exe342FEDB20640669F1B76C6D36183F316E6DF3632D23E1B271BCB76088DB182014565653ECB0990A4FE6F5748ABE2A3A713CA7ECC
NDP40-KB3048074-x86.exeBBE3D72FC1A2FA01733C5360F61EF8741175A8149781674868BF94CBF01A3A67D0139A9DE331D416AAE817A0C04C8AF0EB5A2D4D
NDP45-KB3048077-x64.exe10F530A02EE2367AD828697107DDDE950CFE4CA74112BD8E671F6BE247B52E1E7DD63FA1B565F4FFA4F4751895C3E3EB440B97B4
NDP45-KB3048077-x86.exe13FD5C8B97F66F60868B0A5D1C7E0E89BE929C19C28EF4C5C78B4052687FEFD56575C602CC99C9F38BDB2E8C3D59CA7CD04EC420
NDP46-KB3057781-x64.exe22643DEFD0008DBB54558EA0E055811A679C36D2074A804980B2780A92FC1D1F5C824D1326DED7955B380834F0EDA717480AEEB0
NDP46-KB3057781-x86.exeC4B49BD5FA0FDBCE59C719AF90A485E48D7CB4ADBBE8786F19D4234C0829A6EB9E53DFD183CBBFBA19E9AD7DFBB7ED46E2810210
ogl2007-kb2883029-fullfile-x86-glb.exeF8E098D0065406EBBF4D671297E8340823FAC8352CB5D72ED58B61AF1F35ECE1EC1393C1D4B1ED4BC781BEDC46CA4C0533D4870E
ogl2010-kb2881073-fullfile-x64-glb.exe8B076AC38CF42BA8F5839F30752EBE7491D04C5664C2343FA046403F3FA3AD459D9F6C347A5DD6311C579E0B4604B59393FF6EAB
ogl2010-kb2881073-fullfile-x86-glb.exeF9FA4D80B53EE96CDD95F4DF4FAF900AC36CC39F6B14E90415E7C3AFA1D8847B10C7848B0B04914C1507BCFD4A9A4F36C17723A6
Silverlight.dmg6AA77FFE208D6EC38FCD8F20C2C8E24BDF1A3F9703486C647182E33241A942A56E9DCD283C528A641CC0913FAB4CE194012A60B1
Silverlight.exe5E77FD1CD6EBCC223B0BA9D6AAB9E8F2C309393784B5FCFAB16A8F276E314F6A8077BFA0E0E15DAB09B292445427A98CD42E4509
Silverlight_Developer.dmgAA44336CAE8BA2F518EDD2A9A9DAE419EE2DBCB4F7ABEFBEC44467897894FCF8A6A088842827D6CCD20DFD142DC2D36A4CE606A1
Silverlight_Developer.exe88504FB3CABAEC6E994635C095BB4ADB928356941BA3FB451A8D6BB85553D84376CA13661B8DB41B2AE2DB3E8B0AE632A8E64258
Silverlight_Developer_x64.exe7EB10A6A8FB9CADBD221986E3044CCE4C88D9EEA05166B734A1B29C07615AB54783D712E1384D3D37927F671B269228193CD3D1E
Silverlight_x64.exe2F3040E5F7028C2D42CFF848F361C06F3D237376A3F8A7345737CEE988C52B912742E0E3AD2CB3B2676E7313B83F18878CAFB0B6
Windows10.0-KB3064238-x64.msu57D6DDB173F7E1788B3A490030C273C70F9C376BDD948D7AF8987C52A462D6905EC91A97F953CBE1E44B955D54915835123F5A72
Windows10.0-KB3064238-x64.msu7114AC507C16409574B90C1C6014B1C4F8A5852791305D2F746AB45CF301F66E5B1DE2A34C55487F9406914D7FDC4E82EA91092B
Windows10.0-KB3064238-x86.msu81FE8EBDE91A2E2C683A2860F31F80420FE32582F640E520AF4D216BE7B0DE9DDDDF443194FDF4158513C5BB1DBC10F6723F302D
Windows10.0-KB3064238-x86.msuC7380E524936D1590B77BC22EE8D8C85ED8BE2201C4F2C980D03388E4F5E407A1972D5D99A681CEF30A054BD949D3574D799E51E
Windows6.0-KB3045171-ia64.msu244587B36D7E82D315268046E73D3419DD603E52AE0F76A5439C521608E5203CBD505E2964F51AC0EB6094E640889C4805B35BAE
Windows6.0-KB3045171-x64.msuA96111F5702B4729B177A696326E8DC9E57098A724408616430A8B39D4465A9890CC0EB446492C86C3BF4DB4B71304998BC8B811
Windows6.0-KB3045171-x86.msu620EA5CB09E9D2D1C1902FB55140C5C97960B8688006121E38502A58E70E9A85A38B91297AA2345FB95566EBCA1B1823E816B932
Windows6.0-KB3048068-x64.msu2FFE33D19B3D66EDD0D440C65470BE6FC2CB035D6E18D4EB6ADB1ECF97D631106B0073773D3FB31501338945815897B62259E872
Windows6.0-KB3048068-x86.msu0FDA8F7F4667980B740D683D3A4C1DC4A7BA5082522CC7AF4EBA7A0C157B1B4168CD1A49BF08618953B5F2F809F0BB2FE13B93E6
Windows6.1-KB3045171-ia64.msuE118BB9A405DA803A8B23F35B4B8D2740A21258E8630F60B031BB6C0ADCB5462CDB49E519C1E3D389A119BA04B1D164F470E9DA9
Windows6.1-KB3045171-x64.msu7BC15709A49983D14F746E7141EC1EDCDC71ADB5B2A95E83161983805850EA3C06C5F4F5C649544857746C1C38B999DF1909A32E
Windows6.1-KB3045171-x86.msu9AEDF5CEDA7F456ACD15F9FF8E7659D3C7E1DEE9FC59D31BB53729CBF13F5D79A05349E2A6B4197611711AF4E734583F7301B370
Windows6.1-KB3048070-x64.msu2C43A0C94978F1E264FED6AF0750D78BF9FC0A6710383F91BF9E7E0C8BAEC50A4B4B76798DD6945C9C0DA664F2914F6F307E9D74
Windows6.1-KB3048070-x86.msuE7229326B153F423D221B32AF2FFE465A6E2A9A256A725B53555FB0F568B9376763D8E58BCDA0E4796B8EEC61CEAF44B8D48053F
Windows8.1-KB3045171-x64.msuB787644D4D3252D44DB394130C7A9A1ADB6740B2C3F433C272B71C6E81A0D0AF796CA7FB9137F692D3DB32AEACBAC9DEFE24D4B0
Windows8.1-KB3045171-x86.msu027BCB69F530DDCE6BB05187F49213E85C0A18DF672C3FA4D08CAF5448486D36BB25AB0FB3C5DFB958EB5EB3D810D93529E8E62C
Windows8.1-KB3048072-x64.msu9A5726036E0ED54561775EE4AE7E2F9423DEFE867C83A1F5198F3333593958FE386AB4D706F96B134FD7C7F9350343BFCE54FF96
Windows8.1-KB3048072-x86.msuEC5CCF09CE9390BC6A1926910EDDEF78DCD011E2F7970F21916ADB65911EE28369403EFBA4074D9A984AB5BD59116A422BF3A5E5
Windows8-RT-KB3045171-x64.msu71A6AFEF8AD048E56641B97BAAFDA787B98CAA667408B0330C95961C983E6294AB6AF615FA6EAEF0A12AC2ABFECF58367316E916
Windows8-RT-KB3045171-x86.msu14EA14F7B808B29F452B198429932DFE660E638D50AC479AE83A71A4DDF62F5FBE1F522268F904170C46E75BDD4B4FCAE540CC1C
Windows8-RT-KB3048071-x64.msuA49ADBD3DE8AF2E81F916BE4CA96AD5791FB680AA583C3CE3B3E2180200AD71AFA1BA9AA83BE73A28335177640BDBD7FFA21446B
Windows8-RT-KB3048071-x86.msu8E84227ED319944ABE1C923426D827CE0B5FA8D0BDB2ADA1C0096D0047206DC331F8252698E0BA22007A7A31745C0F5769913776
WindowsServer2003-KB3045171-ia64-DEU.exe4EAEDB9041E2A02F1CBDC397A59D9291BD9085C37EA950BAEEFBF6A996AD5F8FEEE604F20CE2AAD6295DA8C4FF91588A1F8190B7
WindowsServer2003-KB3045171-ia64-ENU.exe42C90E2644544FB785C7F1EE4ED904C02B70A2BC184CB189DE4B5E096F175DFBAA1D7F6BD8E961E5E6C51BFBE9E98EBDF217C049
WindowsServer2003-KB3045171-ia64-FRA.exeEA8F4577B1F34E781D689F00A51677C529D3A314E99431C93EA155690EF5EFEE6B7EC06B57CBC0B48024036DD53406EC6023A4D1
WindowsServer2003-KB3045171-ia64-JPN.exeB62B39E06277ACFEF4F900C711BB2E09C657B6139CBEE002B448AF388A7FC95DCE7A4DD2FA1283476B61A5784C0D2553D34AE28C
WindowsServer2003-KB3045171-x64-CHS.exe7E54E45FD3F668C97F0E830E0F071A1B25502A987A88289E5F0C92890DD4EA9C85F83CE97A94C527EC477A03C63726AB14B55DEC
WindowsServer2003-KB3045171-x64-CHT.exe1D8B89C0C3E4717CF7903A7CA5BC2EC351D616F65E07309D3074AF5A9056BC6A92BD1B0815CBA4188B56FC30517FD7EA53D16FFD
WindowsServer2003-KB3045171-x64-DEU.exe865584B92193740FFC5CCEDF11FF67D5631A0754B0747CA84CFAC4CF93C5C772867EEAB315A8B1B889FCC41581BE3AE3051A5D3A
WindowsServer2003-KB3045171-x64-ENU.exeA3129F8EA90CE3F49D432BE087BCB2C086B22728461BB729719E9BC3ABDA29D6D5B4C8D20FBA74FB4CC40F886EFFC4AE100BDC86
WindowsServer2003-KB3045171-x64-ESN.exe5882B44F7402796D70B29C34A3757009C74CFA1867B47DA2B1771D514A540DBD07816E3F7EEBE42F20EF82F6AE22CB602964B8BA
WindowsServer2003-KB3045171-x64-FRA.exe7D710D51407192ABDA507CE58B063A11A73078CD874BC86503FC78DFBE0FFC4896007723525B4FECB987E42CD50B1BF9790A205C
WindowsServer2003-KB3045171-x64-ITA.exeFF5391B665D3757524795BC261914BA2F398B04FBD86BFA696C0834957B4682DB988F2669BBCE9CB8D968D93740E6130229A7099
WindowsServer2003-KB3045171-x64-JPN.exe390441641B45570BA10B05A1685B0A2E53FEFD36DD39E8C4A1B64FB59029D348D0765D2EEBBB8AC6A33AF9C216A1469504F5A08A
WindowsServer2003-KB3045171-x64-KOR.exeABD6F0F4BEA723F0CEBFCC7A3355737EB5286C9A46246DF6F98FE753720402F91B85977C3FAB1A38331ACFF0E3029760EAF8D35D
WindowsServer2003-KB3045171-x64-PTB.exe823AC2F0E5B4A74530AAD2C63BE8255FBA833FDA8F6F3CA8182781D4FFC3006B95BFE79FABE9270526E7FB61A2AE4DEF91A8DB56
WindowsServer2003-KB3045171-x64-RUS.exe38A316E1E2837E1A5002ADA9A62D0CC2DD83921332261A4A2974085FD356EE3226A781308D7F58BF8AE7169DC1D8A00EF794880D
WindowsServer2003-KB3045171-x86-CHS.exeD6DB53026F2372C2179BCCD3D0D78EDC5866843B1EC4955C69D1221A9BB1A00111500DA87B17E3628485852B2F1FDAA988F72314
WindowsServer2003-KB3045171-x86-CHT.exe3F108F3479A77B0B8775720B7D8364A4BC851D35CF1D664E55F1488D158978C13EC91EF054D648EEA3BC8D3DCA292C7C14349E99
WindowsServer2003-KB3045171-x86-CSY.exe7C7014EABA21B8581942712EFED6AB4548D9941DE1509DADD5AB657ED1657A778B4BAED9D1DCB9E83F19C505019CFC50DA3EF510
WindowsServer2003-KB3045171-x86-DEU.exe8D18201139A418D03194BF0C02EA2C05367B4C6001584565C6883A091064229E0D8EE4605BAC196670CFC14563DE58E763391B1F
WindowsServer2003-KB3045171-x86-ENU.exe1EFAA58A56C7A1657D52368FC03C848A0DF02065900D5B475D3627699C96E09FDA9958B635ACD3F3B7F4F5B1ACDEA5E9E50F8167
WindowsServer2003-KB3045171-x86-ESN.exeF7B1291B5442570784012A403563802803002EBBEAA5944B515F49E5EC84306675C1B1BB09EF7FC2F21592E553E8CD50251ACCB5
WindowsServer2003-KB3045171-x86-FRA.exe5BD1F9BD3D0FFB0BFC9DFAAC6CF33E085AB2B1EE5034DDDFC13A61442159626C9E563CF4B5FB6BEADD7C697C4DE597DC24EBCD7C
WindowsServer2003-KB3045171-x86-HUN.exe71BF31CDD40641B8C5D7E138722BEF89F8F22C58D83F21FEFBF5443FF93D656DF43FC56EF97839DF33E465F79BFBD496CB348FB5
WindowsServer2003-KB3045171-x86-ITA.exe2973B2F02006A8474E111F990908FDCD918509B96C080F8F350E9D48EE6036815803CE33A056CE5865128FF533EDD73E3D5AAA43
WindowsServer2003-KB3045171-x86-JPN.exe521FD8869F610211BF7A8037C934B3B35B81F30A26E337842747D3BD051C68B292CC70FE661DEF2408F1DE56B56932B0F39F4DE9
WindowsServer2003-KB3045171-x86-KOR.exeE941CAD25C216EB06198A765743F66CFB40BAC8040F5BA2AAE85D72BC7AA5EC067787A59AF40E250DB0E8B3493A82945CC8A504F
WindowsServer2003-KB3045171-x86-NLD.exe81D0F67B3D1A084B30AFFAE04B7604A22FAA82AB4D46B6A5EFAB61529C12FC7D447C0B58E7D9C8D97DC76B044A9730E3777515ED
WindowsServer2003-KB3045171-x86-PLK.exeB75CA95EDEF6C502F8CAF8448BEE5B569B97F4B3DEEEC6B0602B946C6DA2A16F591D4682E912450D4521ADD7044F6A5BF07D64B5
WindowsServer2003-KB3045171-x86-PTB.exe3F2957CBF037CF2D914C39A64ED7EFFB7879422CFF41E5425D91E74DC93D59727F94D7FA31EF30C7AAD11A1D992954AB059482D8
WindowsServer2003-KB3045171-x86-PTG.exe31658A69D55A28E63EB6AC9EB52BF08CC3FA25F9885D115CF5A98E2B8E32682182E9F714BE1A89BA8A9D06D70C0A0147B932F239
WindowsServer2003-KB3045171-x86-RUS.exe070F8DF1DB761134134ADD755B56B7DC51300A2432CF3A5A206E2710D1BF804C6B792468D5A4DEAD729B83E82666EB26EC77784D
WindowsServer2003-KB3045171-x86-SVE.exe379F14B4B8154AC0483AB01BD45DD4E678D1378A194036D91AD629359AB3F8FC532649B8CAE41364B06AD7AF6A8B9F0CDBEA5AE6
WindowsServer2003-KB3045171-x86-TRK.exe1E102AF5B7739DDC6E1C75D56181F8C72CAFC8D070BF8656007077ABD17E8F0C01F681B55135FB694E2BB8E5E5F22A8B790F2587

↑ Back to the top


Applies to:

↑ Back to the top

Keywords: kb, atdownload, kbbug, kbexpertiseinter, kbfix, kblangall, kbmustloc, kbsecbulletin, kbsecreview, kbsecurity, kbsecvulnerability, kbsurveynew

↑ Back to the top

Article Info
Article ID : 3057110
Revision : 1
Created on : 1/7/2017
Published on : 6/24/2015
Exists online : False
Views : 133615