Windows timezone UTC +02:00 Cairo Daylight Saving Time updates for August and September 2010

Fix it for me

To respond to the revised schedule, Microsoft released three Fix it Automated solutions, one for each expected transition date. Each Fix it is intended to be applied for a specific period as listed below. These Fix it solutions will update Windows registry keys regarding Daylight Savings Time.


Note you will need to apply the appropriate Fix it solution during the relevant time period to match the revised DST schedule.

Fix it 3: Install this Fix it Solution after 9 September 2010. This turns DST off at 23:59:59 on 30 September 2010.


Important notes regarding these Microsoft Fix it Automated solutions

• The Fix it technology used in this solution does not work with IA64 systems. If you are running Windows on a IA64 system, refer to the "Let me fix it myself" section for steps.
• History will reflect the current range specified in the most recently applied Fix it. Since DST history reflects a single DST period per year, after all the changes are complete (October), the 2010 DST period for Egypt will be listed as running continuously from April through September.
• If you applied Fix it 2, the text on the Date and Time dialog will not list the September 9th DST transition. This is a text-only issue ; it does not prevent the clock or the system time from adjusting correctly for DST.
• The Fix it will update the Windows registry entry for DST, so the system clock shows the corrected time. However, there are additional considerations for Exchange and Outlook:
  
  • Before applying the Fix it described in this article, be aware of potential issues that may affect Microsoft Outlook. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
    931667 How to address time zone changes by using the Time Zone Data Update Tool for Microsoft Office Outlook
  • If you are running Microsoft Exchange Server in an Information Technology (IT) environment, you must take additional measures to guarantee the correct operation of Exchange Server. For more information about Exchange daylight saving time (DST) updates, click the following article number to view the article in the Microsoft Knowledge Base:
    941018 How to address daylight saving time by using the Exchange Calendar Update Tool

Let me fix it myself

If you would prefer to update your system manually, or you are running on an IA64 system, you can perform one of the following methods during the period between 11 August and 9 September 2010:

Method 1: Changing the time zone information in Control Panel

1. In Control Panel, select Clock, Language and Region
2. Click on Date and Time
3. Click the Change Time Zone button
4. Do one of the following after 9 September 2010:
   
   Check the box marked "Automatically adjust clock for Daylight Savings Time"
   
   -or-
   
   If you did not apply Fix it 1 and previously changed your timezone to UTC +2:00 Harare,Pretoria you can revert that change by updating your current time zone to UTC+2:00 Cairo, Egypt
   
5. Select OK to exit dialog.

Method 2: Changing the time zone information in the registry

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 How to back up and restore the registry in Windows

To import the time zone updates, follow these steps:

1. Click Start, click Run, type notepad, and then click OK.
   
2. Copy the following registry information, and then paste it into the Notepad document
   

   [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Time Zones\Egypt Standard Time]
   "TZI"=hex:88,ff,ff,ff,00,00,00,00,c4,ff,ff,ff,00,00,09,00,04,00,05,00,17,00,\
     3b,00,3b,00,e7,03,00,00,04,00,04,00,05,00,17,00,3b,00,3b,00,e7,03
   
   [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Time Zones\Egypt Standard Time\Dynamic DST]
   "FirstEntry"=dword:000007d5
   "LastEntry"=dword:000007da
   "2005"=hex:88,ff,ff,ff,00,00,00,00,c4,ff,ff,ff,00,00,09,00,04,00,05,00,17,00,\
     3b,00,3b,00,e7,03,00,00,04,00,05,00,05,00,00,00,00,00,00,00,00,00
   "2006"=hex:88,ff,ff,ff,00,00,00,00,c4,ff,ff,ff,00,00,09,00,04,00,03,00,17,00,\
     3b,00,3b,00,e7,03,00,00,04,00,05,00,05,00,00,00,00,00,00,00,00,00
   "2007"=hex:88,ff,ff,ff,00,00,00,00,c4,ff,ff,ff,00,00,09,00,04,00,01,00,17,00,\
     3b,00,3b,00,e7,03,00,00,04,00,04,00,05,00,17,00,3b,00,3b,00,e7,03
   "2008"=hex:88,ff,ff,ff,00,00,00,00,c4,ff,ff,ff,00,00,08,00,04,00,05,00,17,00,\
     3b,00,3b,00,e7,03,00,00,04,00,04,00,05,00,17,00,3b,00,3b,00,e7,03
   "2009"=hex:88,ff,ff,ff,00,00,00,00,c4,ff,ff,ff,00,00,08,00,04,00,03,00,17,00,\
     3b,00,3b,00,e7,03,00,00,04,00,04,00,04,00,17,00,3b,00,3b,00,e7,03
   "2010"=hex:88,ff,ff,ff,00,00,00,00,c4,ff,ff,ff,00,00,09,00,04,00,05,00,17,00,\
     3b,00,3b,00,e7,03,00,00,04,00,04,00,05,00,17,00,3b,00,3b,00,e7,03
    

3. On the File menu, click Save As.
4. Select a destination, and then type TZupdate.reg in the File name box.
5. In the Save as type box, click All Files, and then click Save.
6. Double-click TZupdate.reg. Whenyou just saved.
7. Click Yes, and then click OK.