Microsoft KB Archive Search

Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

  1. Home
  2. Incorrect power value is required by a telephone that is running Lync 2010 Phone Edition

Incorrect power value is required by a telephone that is running Lync 2010 Phone Edition

View products that this article applies to.

Symptoms

Consider the following scenario:
  • You have a Polycom telephone that is running Microsoft Lync 2010 Phone Edition.
  • The telephone is powered by a Power over Ethernet (PoE) switch that supports Link Layer Discovery Protocol (LLDP).
  • You start the telephone and collect the network trace log of the startup.
In this scenario, the trace log indicates the telephone use LLDP to require 8.2W power value to startup. Additionally, the telephone might not start up.

Note The maximum power value for the telephone to startup is 6.49W.

↑ Back to the top

Resolution

To resolve this issue, install the following cumulative update:
2636066 Description of the cumulative update for Lync 2010 Phone Edition for Polycom CX700 and LG-Nortel IP Phone 8540: November 2011


↑ Back to the top

Keywords: kb

↑ Back to the top

Article Info
Article ID : 2623826
Revision : 2
Created on : 9/26/2018
Published on : 9/26/2018
Exists online : False
Views : 181