Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

The notification message does not display correctly on a telephone that is running Lync 2010 Phone Edition


View products that this article applies to.

Symptoms

Consider the following scenario:
  • You connect a telephone that is running Microsoft Lync 2010 Phone Edition to a computer that is running Lync 2010 by using USB cable.
  • You lock both the telephone and the computer.
  • You receive an incoming video call or video conference call.
In this scenario, the telephone displays the following notification message:
Note: Answering the call will accept audio only
However, the expected message should be the following message:
Note: Answering the call will accept audio and video on your computer

↑ Back to the top


Cause

This issue occurs because the telephone does not correctly verify that Lync 2010 Phone Edition is paired with Lync 2010. Lync 2010 Phone Edition displays the notification messages depending on whether Lync 2010 Phone Edition is paired with Lync 2010.

↑ Back to the top


Resolution

To resolve this issue, install the following cumulative update:

For Polycom CX500, Polycom CX600 and Polycom CX3000 telephones:
2577594 Description of the cumulative update for Lync 2010 Phone Edition for Polycom CX500, Polycom CX600, and Polycom CX3000: July 2011

For Aastra 6721ip and Aastra 6725ip telephones:
2577595 Description of the cumulative update for Lync 2010 Phone Edition for Aastra 6721ip and Aastra 6725ip: July 2011



↑ Back to the top


Keywords: kbqfe, kbsurveynew, kbexpertisebeginner, kbfix, kbhotfixrollup, kb

↑ Back to the top

Article Info
Article ID : 2577948
Revision : 2
Created on : 9/26/2018
Published on : 9/26/2018
Exists online : False
Views : 349