WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may
require you to reinstall your operating system. Microsoft cannot guarantee that you can solve
problems that result from using Registry Editor incorrectly. Use Registry Editor at your own
risk.
X.400 Service
X.400 protocol events, such as submission and delivery reports.
Resource
Events related to the use of MTA resources.
Security
Events related to attempted security violations.
Interface
Communication among MTA components, between MTAs and between the MTA and
XAPI clients such as the store, MSMI, and DXA. This includes RPC use.
Field Engineering
Internal debugging trace.
MTA Administration
Administration program access to MTA queues and routing information.
Configuration
The configuration of internal parameters and/or problems in one or more
MTA configuration files.
Directory Access
Events related to the MTA's use of the directory.
Operating System
Events related to the MTA's use of Windows NT functions, such as thread
creation and file operations.
Internal Processing
Events related to the internal operation of MTA application code. Error
events in this category indicate serious problem in the MTA.
Interoperability
Tracks the binary content of protocol messages. Use this category and
Interface to log stack traces and XAPI traces to MTADATA\AP*.LOG.
NOTE: No additional events are logged to the application or EV*.LOGs
when logging is turned up on this category.
APDU (Application Protocol Data Unit)
Tracks full P1 content (MTA send/receive) and fully encoded P1 APDU
(communication between remote MTAs) to diagnose interoperability or
conformance problems. Use this category and X.400 Service to log binary
data to MTADATA\BF*.LOG.
NOTE: No additional events are logged to the application or EV*.LOGs
when logging is turned up on this category.
EV*.LOGs are Text Event Logs. You can enable these logs by updating the
registry key TextEventLogging. To do so:
- Start the Registry Editor (Regedt32.exe).
- Locate the following subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeMTA\Parameters\TextEventLogging
- Change the DWord value to 1.
- Quit the Registry Editor.
For additional information about diagnostics logging, click the article number below
to view the article in the Microsoft Knowledge Base:
163032�
XCON: Description of Diagnostics Logging for MTA
' ------------------------------------------------------------------------
' Q153188 Script to enable bf*.log, ev*.log and ap*.log for 5.x MTA
' ------------------------------------------------------------------------
' Copyright (C) 1996-2000 Microsoft Corporation
'
' You have a royalty-free right to use, modify, reproduce and distribute
' the Sample Application Files (and/or any modified version) in any way
' you find useful, provided that you agree that Microsoft has no warranty,
' obligations or liability for any Sample Application Files.
' ------------------------------------------------------------------------
Windows Scripting Host must be installed. To do so, visit the following MSDN Web site:
NOTE: In the code that follows, "HKLM" means "HKEY_LOCAL_MACHINE".
Choice = Inputbox("Enter 1 to make the changes or 2 to set them to defaults")
Select Case Choice
Case "1"
L_Welcome_MsgBox_Message_Text = "This script configures the MTA to provide bf, ev and ap logs for advanced analysis."
L_Welcome_MsgBox_Title_Text = "Modifying registry values"
Call Welcome()
Dim WSHShell
Set WSHShell = WScript.CreateObject("WScript.Shell")
WSHShell.Popup "Setting value HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Parameters\Text Event Log to 1"
WSHShell.RegWrite "HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Parameters\Text Event Log" , 1, "REG_DWORD"
WSHShell.Popup "Setting value HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\X.400 Service to Level 4"
WSHShell.RegWrite "HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\1 X.400 Service" , 4, "REG_DWORD"
WSHShell.Popup "Setting value HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\APDU to Level 4"
WSHShell.RegWrite "HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\12 APDU" , 4, "REG_DWORD"
WSHShell.Popup "Setting value HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\Interface to Level 5"
WSHShell.RegWrite "HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\4 Interface" , 5, "REG_DWORD"
WSHShell.Popup "Setting value HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\Interoperability to Level 5"
WSHShell.RegWrite "HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\11 Interoperability" , 5, "REG_DWORD"
Case "2"
Set WSHShell = WScript.CreateObject("WScript.Shell")
WSHShell.Popup "Setting value HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Parameters\Text Event Log to 0"
WSHShell.RegWrite "HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Parameters\Text Event Log" , 0, "REG_DWORD"
WSHShell.Popup "Setting value HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\X.400 Service to Level 0"
WSHShell.RegWrite "HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\1 X.400 Service" , 0, "REG_DWORD"
WSHShell.Popup "Setting value HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\APDU to Level 0"
WSHShell.RegWrite "HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\12 APDU" , 0, "REG_DWORD"
WSHShell.Popup "Setting value HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\Interface to Level 0"
WSHShell.RegWrite "HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\4 Interface" , 0, "REG_DWORD"
WSHShell.Popup "Setting value HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\Interoperability to Level 0"
WSHShell.RegWrite "HKLM\System\CurrentControlSet\Services\MSExchangeMTA\Diagnostics\11 Interoperability" , 0, ??