Your computer may freeze or restart to a black screen that has a "0xc0000034" error message after you install Service Pack 1 on Windows 7 or Windows 2008 R2

Delete the POQ entries from Pending.xml

• This .vbs script is only applicable for the 0xc0000034 error code, do not use this script for issues other than the 0xc0000034 error.
• We recommend this method if you are an advanced user.
• To use this method we recommend having access to a second computer and a removable media device such as a USB thumb drive.

• Locate a second computer with access to the internet. You will use the second computer to create a script (.vbs) file. To create the script (.vbs) file you will copy the text for the script from this knowledge base article.
• Locate a removable media device such as a USB thumb drive. You will copy the script (.vbs) file that you create to the removable media device. You will then transfer the script (.vbs) file to the computer that is experiencing the issue.

Part 1:Create the script (.vbs) file

1. Locate a second computer with access to the internet.
2. Open Notepad.
3. Copy and paste the following text into Notepad.
   
   Dim xmlDoc, node, nodeList, fileName, backupFileName, numberOfPOQNodes
   
   Set xmlDoc = CreateObject("Microsoft.XMLDOM")
   
   If Wscript.Arguments.Count = 0 Then
   
   WScript.echo("Error! No XML file specified.")
   
   Wscript.quit
   
   End If
   
   fileName = WScript.Arguments(0)
   
   backupFileName = Left(fileName, InStrRev(fileName, ".") - 1) & "_backup.xml"
   
   If Not xmlDoc.load(fileName) Then
   
   WScript.echo("Failure loading XML file " & fileName & ".")
   
   Wscript.quit
   
   End If
   
   xmlDoc.save(backupFileName)
   
   Set nodeList = xmlDoc.documentElement.selectNodes("POQ")
   
   numberOfPOQNodes = nodeList.Length
   
   For Each node in nodeList
   
   xmlDoc.documentElement.removeChild(node)
   
   Next
   
   xmlDoc.save(fileName)
   
   Set xmlDoc = Nothing
   
   WScript.echo(numberOfPOQNodes & " POQ nodes removed. Script completed.")
   
4. Click File, and then click Save as.
5. Name the file Script.vbs and save the file to a removable media device such as a USB thumb drive.

Part 2: Run the script (.vbs) file

1. Restart your computer and start pressing the F8 key on your keyboard. You have to press F8 before the Windows logo appears. If the Windows logo appears, you have to try again by waiting until the Windows logon prompt appears and then shutting down and restarting your computer.
   Note: On a computer that is configured to boot to multiple operating systems, you can press the F8 key when the Boot Menu appears.
   
2. Use the arrow keys to select Repair your Computer in the Advanced Boot Options area, and then press Enter. If you are prompted, select the Windows 7 installation to be repaired, and then click Next.
   
3. Select the language and a keyboard input method, and then click Next.
4. Select a user name, type your password, and then click OK.
5. Under System Recovery Options, make a note of the Windows 7 drive letter listed on the line below Choose a recovery tool.
   
   For example, you may see something similar to the following.
   
   Operating system: Windows 7 on (C:) <VolumeName>
   
   Note In this example, the drive letter for Windows 7 would be C.
   
6. Under System Recovery Options, click Command Prompt.
7. Insert the removable media with the script (.vbs) file that you previously created into the PC.
8. At the command prompt, navigate to the drive, and the directory, that contains the script (.vbs) file that you previously created.
   
   For example, if you previously saved the script.vbs file that you created to the root of a USB thumb drive, and the drive letter associated with the USB thumb drive is the “E” drive, you would simply type the following at the command prompt, and then press Enter.
   
   E:
   
   Note If you are not sure which drive contains the removable media you can use Diskpart to display a list of drives. To run Diskpart, follow these steps.
   
   1. Type Diskpart, and then press Enter.
   2. Type List volume, and then press Enter.
   3. Make a note of the drive that contains the removable media with the script (.vbs) file that you previously created. Assuming you used a USB thumb drive, the drive type will be listed as “Removable”.
   4. To exit Diskpart type Exit, and then press Enter.
   
   
9. At the command prompt, type the following command and press Enter:
   
   Cscript Script.vbs <Windows _7_drive_letter>:\Windows\winsxs\pending.xml.
   
   Where, <Windows _7_drive_letter> is the drive letter that the Windows 7 operating system is installed on.
   
   This will run the script in the Script.vbs file. After the script completes, you may see a message similar to following.
   
   2 POQ nodes removed. Script Completed
   
10. To exit the command prompt type Exit, and then press Enter.
11. Restart your computer. Service Pack 1 installation should now complete successfully.