When you run an NDISTest on a Windows-based computer that has a RNDIS driver installed, a failure is reported, or the computer may become unresponsive

You have a computer that has a Remote Network Driver Interface Specification (RNDIS) driver installed. When you run a Network Driver Interface Specification Test (NDISTest) on this computer to test the driver, NDISTest may report a failure. Sometimes, the computer may become completely frozen and unresponsive.

This issue occurs when the computer is running one of the following operating systems:

• Windows Vista
• Windows Server 2003
• Windows Server 2008

This issue occurs because of an error in the RNDIS Driver.

Hotfix information for Windows Vista

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site: Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must have Windows Vista or Windows Vista Service Pack 1 installed on the computer.

Restart requirement

You have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other previously released hotfixes.

Registry information

To use this hotfix, you do not have to make any changes to the registry.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Vista, x86-based editions

Windows Vista SP1, x86-based editions

Windows Vista, x64-based editions

Windows Vista SP1, x64-based editions

Hotfix information for Windows Server 2003

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site: Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must have Windows Server 2003 Service Pack 1 or Service Pack 2 installed on the computer.

Restart requirement

You have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other previously released hotfixes.

Registry information

To use this hotfix, you do not have to make any changes to the registry.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Server 2003 SP1, x86-based versions

Windows Server 2003 SP1, x64-based versions

Windows Server 2003 SP1, Itanium-based versions

Windows Server 2003 SP2, x86-based versions

Windows Server 2003 SP2, x64-based versions

Windows Server 2003 SP2, Itanium-based versions

Hotfix information for Windows Server 2008

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site: Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Important Windows Vista and Windows Server 2008 hotfixes are included in the same packages. However, only one of these products may be listed on the �Hotfix Request� page. To request the hotfix package that applies to both Windows Vista and Windows Server 2008, just select the product that is listed on the page.

Prerequisites

To apply this hotfix, you must have Windows Server 2008 installed on the computer.

Restart requirement

You have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other previously released hotfixes.

Registry information

To use this hotfix, you do not have to make any changes to the registry.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Server 2008, x86-based editions

Windows Server 2008, x64-based editions

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

For more information about RNDIS drivers, visit the following Microsoft Web sites: For more information, click the following article number to view the article in the Microsoft Knowledge Base: