Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

Error message when you use an FTP client to download a large file from an FTP server: "Connection closed by remote host"


View products that this article applies to.

Symptoms

When you use an FTP client to download a large file from an FTP server, you receive an error message that resembles the following:
Connection closed by remote host
This problem occurs if the following conditions are true:
  • The Application Layer Gateway service is running on the FTP server.
  • The Routing and Remote Access service is running on the FTP server.

↑ Back to the top


Cause

This problem occurs because the Routing and Remote Access service and the Application Layer Gateway service use the Lpnat.sys driver to create a time-out value that is 60 seconds for TCP port mappings. However, the original time-out value for TCP port mappings is 24 hours.

↑ Back to the top


Workaround

To work around this problem, use one of the following methods.

Method 1

Stop the Application Layer Gateway service if you do not have to use the service.

Method 2

Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

Change a registry value to affect the behavior of Application Layer Gateway service on the FTP Server. To do this, follow these steps:
  1. Click Start, click Run, type Regedit, and then click OK.
  2. Locate, and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ALG\ISV\{6E590D61-F6BC-4dad-AC21-7DC40D304059}
  3. In the results pane, double-click PreferExternalManifest.
  4. In the Value data box, type Disable, and then click OK.
  5. On the File menu, click Exit to close Registry Editor.
After you change the registry value, the Application Layer Gateway service does not make port mappings for the FTP Server.

↑ Back to the top


Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

↑ Back to the top


Keywords: KB931130, kbprb, kbtshoot, kbexpertisebeginner

↑ Back to the top

Article Info
Article ID : 931130
Revision : 3
Created on : 1/26/2007
Published on : 1/26/2007
Exists online : False
Views : 394