Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.
ActiveSync does not recognize a Windows Mobile 5.0 device attached by USB cable or cradle
Microsoft Activesync 4.5 is now available. If your device is running Windows Mobile 5.0 software or later versions and syncs with computers that are running Windows XP, you should upgrade to Activesync 4.5. In some cases, issues in this document will be resolved by upgrading to Activesync 4.5. However, the content of this troubleshooting guide also applies to Activesync 4.5 in many cases. It is recommended that you reference this guide for issues you experience with Activesync 4.5 as well.
View the following Microsoft Web site to download Activesync 4.5: https://www.microsoft.com/download/details.aspx?id=15
View the following Microsoft Web site to download Activesync 4.5: https://www.microsoft.com/download/details.aspx?id=15
The Microsoft Windows Mobile device is not recognized when you attach it to your computer using a USB cable or cradle.
This problem occurs when a firewall application blocks ActiveSync application processes. Firewall applications are designed to help block network traffic and help secure the personal computer from incoming network connections. Because ActiveSync uses TCP ports for data transfer with Windows Mobile-based devices, you may have to unblock this traffic in the firewall application. You must add the ActiveSync application processes to the firewall application exception list.
Sometimes, when you add ActiveSync 4.1 or ActiveSync 4.0 to the firewall application exception list, the firewall application will not let the communication between ActiveSync and the Windows Mobile 5.0 device succeed. This behavior occurs in the following cases and may occur in other cases:
Sometimes, when you add ActiveSync 4.1 or ActiveSync 4.0 to the firewall application exception list, the firewall application will not let the communication between ActiveSync and the Windows Mobile 5.0 device succeed. This behavior occurs in the following cases and may occur in other cases:
- Firewall-hook drivers prevent successful synchronized communications. When you use Microsoft Windows XP, contact the firewall vendor to verify that you are using the version of the firewall that works best with Windows XP.
- You use a firewall that implements its own TCP/IP stack. Certain firewalls can implement all Windows TCP/IP interfaces and APIs. These firewalls can also mimic the TCP/IP stack in Windows XP. In this case, the TCP/IP stack of the firewall may not handle the synchronized communication and the Windows TCP/IP stack. This behavior causes problems or communication failures between the Windows Mobile 5.0-based device and ActiveSync.
To resolve this problem, contact the firewall vendor to determine whether one of the following conditions is true:
- The firewall is designed as a firewall-hook driver.
- The firewall uses the firewall that is included with Windows XP Service Pack 2 (SP2).
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
We do not recommend that firewall vendors implement their firewalls as a firewall-hook driver. Additionally, we do not recommend that firewall vendors implement their firewalls as a firewall driver for Windows XP and for later versions of the operating system.
The Microsoft Windows 2000 Driver Development Kit (DDK) introduced the concept of a firewall-hook driver. A firewall-hook driver was intended to manage network packets that were sent and received across a firewall in the context of the TCP/IP protocol.
A firewall-hook driver did not meet the firewall requirements because the driver ran too high in the network stack. A firewall-hook driver could also interfere with the operation of Internet Connection Sharing or a personal firewall.
To provide firewall functionality in Windows XP and in later versions of the operating system, firewall vendors should create a network driver interface specification (NDIS) intermediate miniport driver to manage packets that are sent and received across a firewall.
For more information, visit the following Microsoft Developer Network (MSDN) Web sites:
The Microsoft Windows 2000 Driver Development Kit (DDK) introduced the concept of a firewall-hook driver. A firewall-hook driver was intended to manage network packets that were sent and received across a firewall in the context of the TCP/IP protocol.
A firewall-hook driver did not meet the firewall requirements because the driver ran too high in the network stack. A firewall-hook driver could also interfere with the operation of Internet Connection Sharing or a personal firewall.
To provide firewall functionality in Windows XP and in later versions of the operating system, firewall vendors should create a network driver interface specification (NDIS) intermediate miniport driver to manage packets that are sent and received across a firewall.
For more information, visit the following Microsoft Developer Network (MSDN) Web sites:
Firewall-hook drivers
http://msdn2.microsoft.com/en-us/library/aa504964.aspx
Windows Firewall
http://msdn2.microsoft.com/en-us/library/ms940335.aspx
NDIS intermediate drivers
http://msdn2.microsoft.com/en-us/library/aa504394.aspx
http://msdn2.microsoft.com/en-us/library/aa504964.aspx
Windows Firewall
http://msdn2.microsoft.com/en-us/library/ms940335.aspx
NDIS intermediate drivers
http://msdn2.microsoft.com/en-us/library/aa504394.aspx
Visit our Windows Phone Forums for more helpful hints and ideas.- For more information about staying connected, visit the following Microsoft Web site: http://www.microsoft.com/windowsmobile/en-us/help/v6-0/Staying-Connected.aspx
- Need help using, updating, or managing your Windows Mobile phone? Visit the following Microsoft Web site to find a collection of links guiding you straight to advice and answers to common and complex questions. http://www.microsoft.com/windowsmobile/en-us/help/more/default.mspx
- For more help with your Windows Mobile device please see the Windows Phone Forum: http://social.microsoft.com/Forums/en-us/windowsmobilehelp/threads
Keywords: kb, kbprb, kbtshoot, kbbug, kbentirenet