Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

"0x00000001" Stop error when a shared VHDX file is accessed in Windows Server 2012 R2-based Hyper-V guest


View products that this article applies to.

This article describes a Stop error that occurs in Windows Server 2012 R2. You can fix this issue by using the update in this article. Before you install this update, see the Prerequisites section.

↑ Back to the top


Symptoms

When you access a shared virtual hard disk file (.vhdx) through a redirector and a time-out error or network error is returned to VHDMP.sys, you may receive a Stop error that looks something like this:

STOP: 0x00000001 (parameter1, parameter2, parameter3, parameter4)

This error occurs because of the double release of a push lock.

Notes

  • This Stop error indicates an APC_INDEX_MISMATCH issue.
  • The parameters in this Stop error message vary, depending on the configuration of the computer.
  • Not all "0x00000001" Stop errors are caused by this issue.

↑ Back to the top


How to get this update

You can get this update through Windows Update and the Microsoft Download Center. Even though this issue is observed only in Windows Server 2012 R2, this update also applies to Windows 8.1. 

Important If you install a language pack after you install this update, you must reinstall this update. Therefore, we recommend that you install any language packs that you need before you install this update. For more information, see Add language packs to Windows.

Method 1: Windows Update

This update is provided as a Recommended update on Windows Update. For more information on how to run Windows Update, see How to get an update through Windows Update.

Method 2: Microsoft Download Center

The following files are available for download from the Microsoft Download Center:
Operating systemUpdate
All supported x86-based versions of Windows 8.1Download Download the package now.
All supported x64-based versions of Windows 8.1 Download Download the package now.
All supported x64-based versions of Windows Server 2012 R2Download Download the package now.
For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:
119591 How to obtain Microsoft support files from online services
Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help prevent any unauthorized changes to the file.

Update detail information

Prerequisites

To apply this update, you must have April 2014 update rollup for Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2 (2919355) installed in Windows 8.1 or Windows Server 2012 R2.

Registry information

To apply this update, you don't have to make any changes to the registry.

Restart requirement

You may have to restart the computer after you apply this update.

Update replacement information

This update doesn't replace a previously released update.

↑ Back to the top


Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

↑ Back to the top


References

Learn about the terminology that Microsoft uses to describe software updates.

↑ Back to the top


File Information

The English (United States) version of this software update installs files that have the attributes that are listed in the following tables.
Windows 8.1 and Windows Server 2012 R2
Notes
  • The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:
    VersionProductMilestoneService branch
    6.3.960 0.18 xxxWindows 8.1 and Windows Server 2012 R2RTMGDR
  • GDR service branches contain only those fixes that are widely released to address widespread, critical issues. LDR service branches contain hotfixes in addition to widely released fixes.
  • The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed in the "Additional file information" section. MUM, MANIFEST, and the associated security catalog (.cat) files, are very important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.
x86 Windows 8.1
File nameFile versionFile sizeDateTimePlatform
Vhdmp.sys6.3.9600.18230410,96806-Feb-201623:10x86
x64 Windows 8.1 and Windows Server 2012 R2
File nameFile versionFile sizeDateTimePlatform
Vhdmp.sys6.3.9600.18230551,25606-Feb-201623:05x64

Additional file information
x86 Windows 8.1
File propertyValue
File nameUpdate.mum
File versionNot applicable
File size1,578
Date (UTC)06-Feb-2016
Time (UTC)23:19
PlatformNot applicable
File nameX86_vhdmp.inf_31bf3856ad364e35_6.3.9600.18230_none_3b6201ece51227a2.manifest
File versionNot applicable
File size2,095
Date (UTC)06-Feb-2016
Time (UTC)23:23
PlatformNot applicable
x64 Windows 8.1 and Windows Server 2012 R2
File propertyValue
File nameAmd64_vhdmp.inf_31bf3856ad364e35_6.3.9600.18230_none_97809d709d6f98d8.manifest
File versionNot applicable
File size2,099
Date (UTC)06-Feb-2016
Time (UTC)23:26
PlatformNot applicable
File nameUpdate.mum
File versionNot applicable
File size1,586
Date (UTC)06-Feb-2016
Time (UTC)23:19
PlatformNot applicable

↑ Back to the top


Keywords: kbsurveynew, kbfix, kbexpertiseinter, atdownload, kb

↑ Back to the top

Article Info
Article ID : 3141074
Revision : 2
Created on : 4/9/2020
Published on : 4/9/2020
Exists online : False
Views : 280