Microsoft KB Archive Search

Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

  1. Home
  2. FIX: DAD fails when a duplicate IP address is being used and AutoCfg is enabled in Windows Embedded Compact 2013

FIX: DAD fails when a duplicate IP address is being used and AutoCfg is enabled in Windows Embedded Compact 2013

View products that this article applies to.

Introduction

This article describes an problem that occurs when a duplicate IP address is being used and AutoCfg is enabled in Windows Embedded Compact 2013. An update is available to resolve this problem. Before you install this update, all previously issued updates for this product must be installed.

↑ Back to the top

Symptoms

Consider the following scenario:
  • You have the AutoCfg option enabled on a Windows Embedded Compact 2013 device.
  • The device obtains an IP address from Dynamic Host Configuration Protocol (DHCP), and then starts duplicate address detection (DAD) by broadcasting an Address Resolution Protocol (ARP) request.
  • The IP address is being used by another device on the network.

In this scenario, DAD fails after an ARP response is received. Therefore, the device cannot join the network.

↑ Back to the top

Software update information

Download information

Windows Embedded Compact 2013 Monthly Update (April 2015) is now available from Microsoft. To download this Windows Embedded Compact 2013 monthly update, go to Microsoft OEM Online or MyOEM.

Prerequisites

This update is supported only if all previously issued updates for this product have also been installed.

Restart requirement

After you apply this update, you must perform a clean build of the whole platform. To do this, use one of the following methods:
  • On the Build menu, click Clean Solution, and then click Build Solution.
  • On the Build menu, click Rebuild Solution.
You do not have to restart the computer after you apply this software update.

Update replacement information

This update does not replace any other updates.

File information
The English version of this software update package has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Files that are included in this update package
File nameFile sizeDateTimePath
Ipnglib.lib6,193,19828-Apr-201510:38Public\Common\Oak\Lib\X86\Checked
Ipnglib.lib5,767,54628-Apr-201510:38Public\Common\Oak\Lib\X86\Retail
Ipnglib.lib5,430,49228-Apr-201510:37Public\Common\Oak\Lib\X86\Debug
Ipnglib.lib5,817,10028-Apr-201510:38Public\Common\Oak\Lib\Armv7\Checked
Ipnglib.lib5,314,19428-Apr-201510:38Public\Common\Oak\Lib\Armv7\Retail
Ipnglib.lib6,325,91228-Apr-201510:37Public\Common\Oak\Lib\Armv7\Debug

↑ Back to the top

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

↑ Back to the top

References

Learn about the terminology that Microsoft uses to describe software updates.

↑ Back to the top

Keywords: kbqfe, kbsurveynew, kbfix, kbexpertiseadvanced, atdownload, kb

↑ Back to the top

Article Info
Article ID : 3060816
Revision : 1
Created on : 1/7/2017
Published on : 5/21/2015
Exists online : False
Views : 257