Microsoft KB Archive Search

Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

  1. Home
  2. Incorrect G/L Entry - VAT Entry Links exist in Microsoft Dynamics NAV 2009

Incorrect G/L Entry - VAT Entry Links exist in Microsoft Dynamics NAV 2009

View products that this article applies to.

Symptoms

After you implement the correction in KB3001759 and KB3036811 in Microsoft Dynamics NAV 2009, the G/L entries can be unapplied. However, there are incorrect G/L Entry - VAT Entry Links posted in the application. Follow the steps in the code changes section to solve this issue. This problem occurs in the following products:
  • Microsoft Dynamics NAV 2009 R2
  • Microsoft Dynamics NAV 2009 SP1

↑ Back to the top

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

↑ Back to the top

Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure. However, they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Dynamics NAV client users are logged off the system. This includes Microsoft Dynamics NAV Application Server (NAS) services. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
  • The Modify permission for the object that you will be changing.
  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015

    object.
Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.

To resolve this problem, follow these steps:
  1. Change the code in UnapplyCustLedgEntry function in the Gen. Jnl.-Post Line codeunit (12) as follows:
    Existing code 1
    ...    
    NegativeLCYAppAmt@1021 : Decimal;
          PositiveACYAppAmt@1020 : Decimal;
          NegativeACYAppAmt@1019 : Decimal;
          
    // Delete the following lines.
    VatBaseSum@1008 : ARRAY [2] OF Decimal;
    EntryNoBegin@1025 : ARRAY [2] OF Integer;
    // End of the deleted lines.

          i@1027 : Integer;
          TempVatEntryNo@1028 : Integer;
        BEGIN
    ...
    Replacement code 1
    ...  
    NegativeLCYAppAmt@1021 : Decimal;
          PositiveACYAppAmt@1020 : Decimal;
          NegativeACYAppAmt@1019 : Decimal;
          
    // Add the following lines.
    VatBaseSum@1008 : ARRAY [3] OF Decimal;
    EntryNoBegin@1025 : ARRAY [3] OF Integer;
    // End of the added lines.

          i@1027 : Integer;
          TempVatEntryNo@1028 : Integer;
        BEGIN
    ...
    Existing code 2
    ...
     VATEntry2."Entry No." := NextVATEntryNo;
                  NextVATEntryNo := NextVATEntryNo + 1;
                  VATEntry2.INSERT;
                  TempVatEntry.DELETE;
                END;
                IF (VATPostingSetup."Adjust for Payment Discount") AND
    ...
    Replacement code 2
    ...
    VATEntry2."Entry No." := NextVATEntryNo;
                  NextVATEntryNo := NextVATEntryNo + 1;
                  VATEntry2.INSERT;
                  
    // Add the following lines.
    IF VATEntry2."Unrealized VAT Entry No." = 0 THEN BEGIN
    GLEntryTmp."Entry No." := NextEntryNo;
    GLEntryVatEntrylink.InsertLink(GLEntryTmp,VATEntry2);
    END;
    // End of the added lines.

                  TempVatEntry.DELETE;
                END;
                IF (VATPostingSetup."Adjust for Payment Discount") AND
    ...
    Existing code 3
    ...
     IF TempVatEntry.FINDSET THEN BEGIN
                REPEAT
                  CASE TRUE OF
                    VatBaseSum[2] + TempVatEntry.Base = DtldCustLedgEntry2."Amount (LCY)":
                      i := 3;
                    VatBaseSum[1] + TempVatEntry.Base = DtldCustLedgEntry2."Amount (LCY)":
    ...
    Replacement code 3
    ...
    IF TempVatEntry.FINDSET THEN BEGIN
                REPEAT
                  CASE TRUE OF

    // Add the followoing lines.
    VATBaseSum[3] + TempVatEntry.Base = DtldCustLedgEntry2."Amount (LCY)":
    i := 4;
    // End of the added lines.

                    VatBaseSum[2] + TempVatEntry.Base = DtldCustLedgEntry2."Amount (LCY)":
                      i := 3;
                    VatBaseSum[1] + TempVatEntry.Base = DtldCustLedgEntry2."Amount (LCY)":
    ...
    Existing code 4
    ...
    END;
                      TempVatEntry := VATEntrySaved;
                    UNTIL TempVatEntry.NEXT = 0;
                    
    // Delete the following line.
    FOR i := 1 TO 2 DO BEGIN
    // End of the deleted line.

                      VatBaseSum[i] := 0;
                      EntryNoBegin[i] := 0;
                    END;
    ...
    Replacement code 4
    ...
    END;
                      TempVatEntry := VATEntrySaved;
                    UNTIL TempVatEntry.NEXT = 0;
                    
    // Add the following line.
    FOR i := 1 TO 3 DO BEGIN
    // End of the added line.

                      VatBaseSum[i] := 0;
                      EntryNoBegin[i] := 0;
                    END;
    ...
    Existing code 5
    ...
    END;
                    TempVatEntry.SETRANGE("Entry No.",0,999999);
                  END ELSE BEGIN
                    VatBaseSum[2] := VatBaseSum[1] + TempVatEntry.Base;
                    VatBaseSum[1] := TempVatEntry.Base;
                    EntryNoBegin[2] := EntryNoBegin[1];
                    EntryNoBegin[1] := TempVatEntry."Entry No.";
                  END;
    ...
    Replacement code 5
    ...
    END;
                    TempVatEntry.SETRANGE("Entry No.",0,999999);
                  END ELSE BEGIN
                    
    // Add the following line.
    VatBaseSum[3] += TempVATEntry.Base;
    // End of the added line.

                    VatBaseSum[2] := VatBaseSum[1] + TempVatEntry.Base;
                    VatBaseSum[1] := TempVatEntry.Base;

    // Add the folloiwng lines.           
    IF EntryNoBegin[3] > 0 THEN
    EntryNoBegin[3] := TempVatEntry."Entry No.";
    // End of the added lines.

    EntryNoBegin[2] := EntryNoBegin[1];
                    EntryNoBegin[1] := TempVatEntry."Entry No.";
                  END;
    ...
  2. Change the code in UnapplyVendLedgEntry function in the Gen. Jnl.-Post Line codeunit (12) as follows:
    Existing code 1
    ...    
    NegativeLCYAppAmt@1021 : Decimal;
          PositiveACYAppAmt@1020 : Decimal;
          NegativeACYAppAmt@1019 : Decimal;
          
    // Delete the following lines.
    VatBaseSum@1029 : ARRAY [2] OF Decimal;
    EntryNoBegin@1028 : ARRAY [2] OF Integer;
    // End of the deleted lines.

          i@1027 : Integer;
          TempVatEntryNo@1025 : Integer;
        BEGIN
    ...
    Replacement code 1
    ...   
     NegativeLCYAppAmt@1021 : Decimal;
          PositiveACYAppAmt@1020 : Decimal;
          NegativeACYAppAmt@1019 : Decimal;
          V
    // Add the following lines.
    atBaseSum@1029 : ARRAY [3] OF Decimal;
    EntryNoBegin@1028 : ARRAY [3] OF Integer;
    // End of the added lines.

          i@1027 : Integer;
          TempVatEntryNo@1025 : Integer;
        BEGIN
    ...
    Existing code 2
    ...
    VatEntry2."Entry No." := NextVATEntryNo;
                  NextVATEntryNo := NextVATEntryNo + 1;
                  VatEntry2.INSERT;
                  TempVatEntry.DELETE;
                END;
                IF (VATPostingSetup."Adjust for Payment Discount") AND
    ...
    Replacement code 2
    ...
    VatEntry2."Entry No." := NextVATEntryNo;
                  NextVATEntryNo := NextVATEntryNo + 1;
                  VatEntry2.INSERT;

    // Add the following lines.
    IF VatEntry2."Unrealized VAT Entry No." = 0 THEN BEGIN
    GLEntryTmp."Entry No." := NextEntryNo;
    GLEntryVatEntrylink.InsertLink(GLEntryTmp,VatEntry2);
    END;
    // End of the added lines.

                  TempVatEntry.DELETE;
                END;
                IF (VATPostingSetup."Adjust for Payment Discount") AND
    ...
    Existing code 3
    ...
      IF TempVatEntry.FINDSET THEN BEGIN
                REPEAT
                  CASE TRUE OF
                    VatBaseSum[2] + TempVatEntry.Base = DtldVendLedgEntry2."Amount (LCY)":
                      i := 3;
                    VatBaseSum[1] + TempVatEntry.Base = DtldVendLedgEntry2."Amount (LCY)":
    ...
    Replacement code 3
    ...
    IF TempVatEntry.FINDSET THEN BEGIN
                REPEAT
                  CASE TRUE OF

    // Add the following lines.
    VATBaseSum[3] + TempVatEntry.Base = DtldVendLedgEntry2."Amount (LCY)":
    i := 4;
    // End of the added lines.

                    VatBaseSum[2] + TempVatEntry.Base = DtldVendLedgEntry2."Amount (LCY)":
                      i := 3;
                    VatBaseSum[1] + TempVatEntry.Base = DtldVendLedgEntry2."Amount (LCY)":
    ...
    Existing code 4
    ...
    END;
                    TempVatEntry.SETRANGE("Entry No.",0,999999);
                  END ELSE BEGIN
                    VatBaseSum[2] := VatBaseSum[1] + TempVatEntry.Base;
                    VatBaseSum[1] := TempVatEntry.Base;
                    EntryNoBegin[2] := EntryNoBegin[1];
                    EntryNoBegin[1] := TempVatEntry."Entry No.";
                  END;
    ...
    Replacement code 4
    ...
     END;
                    TempVatEntry.SETRANGE("Entry No.",0,999999);
                  END ELSE BEGIN
                    
    // Add the following line.
    VatBaseSum[3] += TempVATEntry.Base;
    // End of the added line.

                    VatBaseSum[2] := VatBaseSum[1] + TempVatEntry.Base;
                    VatBaseSum[1] := TempVatEntry.Base;
                    
    // Add the following lines.
    IF EntryNoBegin[3] > 0 THEN
    EntryNoBegin[3] := TempVatEntry."Entry No.";
    // End of the added lines.

                    EntryNoBegin[2] := EntryNoBegin[1];
                    EntryNoBegin[1] := TempVatEntry."Entry No.";
                  END;
    ...
  3. Change the code in InsertVatEntriesFromTemp function in the Gen. Jnl.-Post Line codeunit (12) as follows:
    Existing code
    ...
     DtldCVLedgEntryBuf."Entry Type"::"Payment Tolerance (VAT Excl.)":
              TempVatEntry.SETRANGE("Entry No.",2000000,2999999)
          END;
          
    // Delete the following line.
    TempVatEntry.FINDSET;
    // End of the deleted line.

          REPEAT
            VATEntry := TempVatEntry;
            VATEntry."Entry No." := NextVATEntryNo;
            VATEntry.INSERT;
            NextVATEntryNo := NextVATEntryNo + 1;
            IF VATEntry."Unrealized VAT Entry No." = 0 THEN
              GLEntryVatEntrylink.InsertLink(GLEntry,VATEntry);
            TempVatEntry.DELETE;
            LinkedAmount := LinkedAmount + VATEntry.Base;
            Complete := LinkedAmount = -DtldCVLedgEntryBuf."Amount (LCY)";
          UNTIL Complete OR (TempVatEntry.NEXT = 0);
        END;

        LOCAL PROCEDURE CaptureOrRefundCreditCardPmnt@85() : Integer;
    ...
    Replacement code 
    ...
    DtldCVLedgEntryBuf."Entry Type"::"Payment Tolerance (VAT Excl.)":
              TempVatEntry.SETRANGE("Entry No.",2000000,2999999)
          END;
          
    // Add the following line.
    IF TempVatEntry.FINDSET THEN
    // End of the added line.

            REPEAT
              VATEntry := TempVatEntry;
              VATEntry."Entry No." := NextVATEntryNo;
              VATEntry.INSERT;
              NextVATEntryNo := NextVATEntryNo + 1;
              IF VATEntry."Unrealized VAT Entry No." = 0 THEN
                GLEntryVatEntrylink.InsertLink(GLEntry,VATEntry);
              TempVatEntry.DELETE;
              LinkedAmount := LinkedAmount + VATEntry.Base;
              Complete := LinkedAmount = -DtldCVLedgEntryBuf."Amount (LCY)";
            UNTIL Complete OR (TempVatEntry.NEXT = 0);
        END;

        LOCAL PROCEDURE CaptureOrRefundCreditCardPmnt@85() : Integer;
    ...

Prerequisites

You must have one of the following products installed to apply this hotfix:
  • Microsoft Dynamics NAV 2009 R2
  • Microsoft Dynamics NAV 2009 SP1
In addition, you must have KB3001759 and KB3036811 installed.

Removal information

You cannot remove this hotfix.

↑ Back to the top

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

↑ Back to the top

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Usefor other considerations.

↑ Back to the top

Keywords: kbqfe, kbmbspartner, kbmbsquickpub, kbmbsmigrate, kbsurveynew, kbnoloc, kbmbscodefix, kb

↑ Back to the top

Article Info
Article ID : 3036818
Revision : 1
Created on : 1/7/2017
Published on : 2/10/2015
Exists online : False
Views : 203