Microsoft KB Archive Search

Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

  1. Home
  2. The VAT entry is created incorrectly when you post a purchase order in Microsoft Dynamics NAV 2009

The VAT entry is created incorrectly when you post a purchase order in Microsoft Dynamics NAV 2009

View products that this article applies to.

Symptoms

When you use "Sell-to/Buy-from No." as the "Bill-to/Sell-to VAT Calc." value in the General Ledger (GL) setup dialog box after you install KB2705249, the purchase transactions are not handled correctly. Follow the steps in the code changes section to solve this issue. This problem occurs in the following products:
  • Microsoft Dynamics NAV 2009 R2
  • Microsoft Dynamics NAV 2009 SP1

↑ Back to the top

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

↑ Back to the top

Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure. However, they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Dynamics NAV client users are logged off the system. This includes Microsoft Dynamics NAV Application Server (NAS) services. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
  • The Modify permission for the object that you will be changing.
  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015

    object.
Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.

To resolve this problem, follow these steps:

  1. Change the code in Fields in the Sales Header Table (36) as follows:
    Existing code 1
    ...
    "Bill-to Country/Region Code" := Cust."Country/Region Code";

    // Delete the following line.
    "VAT Country/Region Code" := Cust."Country/Region Code";
    // End of the deleted line.

    IF NOT SkipBillToContact THEN
    ...
    Replacement code 1
    ...
     "Bill-to Country/Region Code" := Cust."Country/Region Code";
     IF NOT SkipBillToContact THEN
    ...
    Existing code 2
    ...
    // Delete the following line.
    "Gen. Bus. Posting Group" := Cust."Gen. Bus. Posting Group";
    // End of the deleted line.

    GLSetup.GET;
    ...
    Replacement code 2
    ...
    GLSetup.GET;
    ...
    Existing code 3

    ...
    GLSetup.GET;

    // Delete the following line.
    IF GLSetup."Bill-to/Sell-to VAT Calc." = GLSetup."Bill-to/Sell-to VAT Calc."::"Bill-to/Pay-to No." THEN
    // End of the deleted line.

    "VAT Bus. Posting Group" := Cust."VAT Bus. Posting Group";
    ...
    Replacement code 3
    ...
    GLSetup.GET;

    // Add the following line.
    IF GLSetup."Bill-to/Sell-to VAT Calc." = GLSetup."Bill-to/Sell-to VAT Calc."::"Bill-to/Pay-to No." THEN BEGIN
    // End of the added line.
                                                                
    "VAT Bus. Posting Group" := Cust."VAT Bus. Posting Group";
    ...
    Existing code 4
    ...
    "VAT Bus. Posting Group" := Cust."VAT Bus. Posting Group";
    "Customer Posting Group" := Cust."Customer Posting Group";
    ...
    Replacement code 4
    ...
    "VAT Bus. Posting Group" := Cust."VAT Bus. Posting Group";

    // Add the following lines.
    "VAT Country/Region Code" := Cust."Country/Region Code";
    "VAT Registration No." := Cust."VAT Registration No.";
    "Gen. Bus. Posting Group" := Cust."Gen. Bus. Posting Group";
    END;
    // End of the added lines.

    "Customer Posting Group" := Cust."Customer Posting Group";
    ...
    Existing code 5
    ...
    Reserve := Cust.Reserve;
     
    // Delete the following line. 
    "VAT Registration No." := Cust."VAT Registration No."; 
    // End of the deleted line.
     
    IF "Document Type" = "Document Type"::Order THEN
    ...
    Replacement code 5
    ...
    Reserve := Cust.Reserve;
    IF "Document Type" = "Document Type"::Order THEN
    ...
  2. Change the code in Fields in the Purchase Header Table (38) as follows:
    Existing code 1
    ...
    "Pay-to County" := Vend.County;

    // Delete the following lines.
    "Pay-to Country/Region Code" := Vend."Country/Region Code";
    "VAT Country/Region Code" := Vend."Country/Region Code";
    // End of the deleted lines.

    IF NOT SkipPayToContact THEN
    ...
    Replacement code 1
    ...
    "Pay-to County" := Vend.County;

    IF NOT SkipPayToContact THEN
    ...
    Existing code 2
    ...
     "Vendor Posting Group" := Vend."Vendor Posting Group";

    // Delete the following line.
    "Gen. Bus. Posting Group" := Vend."Gen. Bus. Posting Group";
    // End of the deleted line.

    GLSetup.GET;
    ...
    Replacement code 2
    ...
    "Vendor Posting Group" := Vend."Vendor Posting Group";
    GLSetup.GET;
    ...
    Existing code 3
    ...
    GLSetup.GET;

    // Delete the following line.
    IF GLSetup."Bill-to/Sell-to VAT Calc." = GLSetup."Bill-to/Sell-to VAT Calc."::"Bill-to/Pay-to No." THEN
    // End of the deleted line.

    "VAT Bus. Posting Group" := Vend."VAT Bus. Posting Group";
    ...
    Replacement code 3
    ...
    GLSetup.GET;

    // Add the following line.
    IF GLSetup."Bill-to/Sell-to VAT Calc." = GLSetup."Bill-to/Sell-to VAT Calc."::"Bill-to/Pay-to No." THEN BEGIN
    // End of the added line.

    "VAT Bus. Posting Group" := Vend."VAT Bus. Posting Group";
    ...
    Existing code 4
    ...
    "VAT Bus. Posting Group" := Vend."VAT Bus. Posting Group";
    "Prices Including VAT" := Vend."Prices Including VAT";
    ...
    Replacement code 4
    ...
       "VAT Bus. Posting Group" := Vend."VAT Bus. Posting Group";

    // Add the following lines.
    "VAT Country/Region Code" := Vend."Country/Region Code";
    "VAT Registration No." := Vend."VAT Registration No.";
    "Gen. Bus. Posting Group" := Vend."Gen. Bus. Posting Group";
     END;
    // End of the added lines.

    "Prices Including VAT" := Vend."Prices Including VAT";
    ...
    Existing code 5
    ...
    VALIDATE("Currency Code");

    // Delete the following line.
    "VAT Registration No." := Vend."VAT Registration No.";
    // End of the deleted line.

    IF "Document Type" = "Document Type"::Order THEN
    ...
    Replacement code 5
    ...
    VALIDATE("Currency Code");
    IF "Document Type" = "Document Type"::Order THEN
    ...
  3. Change the code in Fields in the Service Header Table (5900) as follows:
    Existing code 1
    ...
     "Bill-to County" := Cust.County;

    // Delete the following line.
    "Bill-to Country/Region Code" := Cust."Country/Region Code";
    // End of the deleted line.

    IF NOT SkipBillToContact THEN
    ...
    Replacement code 1
    ...
    "Bill-to County" := Cust.County;
    IF NOT SkipBillToContact THEN
    ...
    Existing code 2
    ...
     
    // Delete the following line.
    "Gen. Bus. Posting Group" := Cust."Gen. Bus. Posting Group";
    // End of the deleted line.

     GLSetup.GET;
    ...
    Replacement code 2

    ...

    GLSetup.GET;
    ...
    Existing code 3
    ...
    GLSetup.GET;

    // Delete the following line.
    IF GLSetup."Bill-to/Sell-to VAT Calc." = GLSetup."Bill-to/Sell-to VAT Calc."::"Bill-to/Pay-to No." THEN
    // End of the deleted line.

    "VAT Bus. Posting Group" := Cust."VAT Bus. Posting Group";
    ...
    Replacement code 3
    ...
    GLSetup.GET;

    // Add the following line.
    IF GLSetup."Bill-to/Sell-to VAT Calc." = GLSetup."Bill-to/Sell-to VAT Calc."::"Bill-to/Pay-to No." THEN BEGIN
    // End of the added line.

    "VAT Bus. Posting Group" := Cust."VAT Bus. Posting Group";
    ...
    Existing code 4
    ...
    "VAT Bus. Posting Group" := Cust."VAT Bus. Posting Group";
    "Customer Posting Group" := Cust."Customer Posting Group";
    ...
    Replacement code 4
    ...
     "VAT Bus. Posting Group" := Cust."VAT Bus. Posting Group";

    // Add the following lines.
    "VAT Registration No." := Cust."VAT Registration No.";
    "VAT Country/Region Code" := Cust."Country/Region Code";
    "Gen. Bus. Posting Group" := Cust."Gen. Bus. Posting Group";
    END;
    // End of the added lines.

    "Customer Posting Group" := Cust."Customer Posting Group";
    ...
    Existing code 5
    ...
     Reserve := Cust.Reserve;

    // Delete the following line.
    "VAT Registration No." := Cust."VAT Registration No.";
    // End of the deleted line.

    ValidateServPriceGrOnServItem;
    ...
    Replacement code 5
    ...
    Reserve := Cust.Reserve;
    ValidateServPriceGrOnServItem;
    ...
  4. Change the code in the InsertVAT Function in the Gen. Jnl.-Post Line Codeunit (12) as follows:

    Existing code

    ...
    VATEntry."Bill-to/Pay-to No." := "Bill-to/Pay-to No.";

    // Delete the following lines.
    IF "Bill-to/Pay-to No." <> '' THEN
    CASE VATEntry.Type OF
    VATEntry.Type::Purchase:
    BEGIN
    IF Vend."No." <> "Bill-to/Pay-to No." THEN
    Vend.GET("Bill-to/Pay-to No.");
    VATEntry."Country/Region Code" := Vend."Country/Region Code";
    VATEntry."VAT Registration No." := Vend."VAT Registration No.";
    END;
    VATEntry.Type::Sale:
    BEGIN
    IF Cust."No." <> "Bill-to/Pay-to No." THEN
    Cust.GET("Bill-to/Pay-to No.");
    VATEntry."Country/Region Code" := Cust."Country/Region Code";
    VATEntry."VAT Registration No." := Cust."VAT Registration No.";
    END;
    END;

    // End of the deleted lines.
    ...

    Replacement code

    ...
     VATEntry."Bill-to/Pay-to No." := "Bill-to/Pay-to No.";

    // Add the following lines.
    VATEntry."Country/Region Code" := "Country/Region Code";
    VATEntry."VAT Registration No." := "VAT Registration No.";
    // End of the added lines.

    ...
  5. Change the code in the CopyFields Function in the Gen. Jnl.-Post Batch Codeunit (13) as follows:
    Existing code 1
    ...
     GenJnlLine7."Ship-to/Order Address Code" := GenJnlLine4."Ship-to/Order Address Code";
                      GenJnlLine7.MODIFY;
    ...
    Replacement code 1
    ...
    GenJnlLine7."Ship-to/Order Address Code" := GenJnlLine4."Ship-to/Order Address Code";

    // Add the following lines.
    GenJnlLine7."VAT Registration No." := GenJnlLine4."VAT Registration No.";
    GenJnlLine7."Country/Region Code" := GenJnlLine4."Country/Region Code";
    // End of the added lines.

    GenJnlLine7.MODIFY;
    ...
    Existing code 2
    ...
     GenJnlLine7."Ship-to/Order Address Code" := GenJnlLine4."Ship-to/Order Address Code";
                      GenJnlLine7.MODIFY;
    ...
    Replacement code 2
    ...
    GenJnlLine7."Ship-to/Order Address Code" := GenJnlLine4."Ship-to/Order Address Code";

    // Add the following lines.
    GenJnlLine7."VAT Registration No." := GenJnlLine4."VAT Registration No.";
    GenJnlLine7."Country/Region Code" := GenJnlLine4."Country/Region Code";
    // End of the added lines.

    GenJnlLine7.MODIFY;
    ...


Prerequisites

You must have one of the following products installed to apply this hotfix:
  • Microsoft Dynamics NAV 2009 R2
  • Microsoft Dynamics NAV 2009 SP1

Removal information

You cannot remove this hotfix.

↑ Back to the top

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

↑ Back to the top

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Usefor other considerations.

↑ Back to the top

Keywords: kbqfe, kbmbsquickpub, kbmbsmigrate, kbmbspartner, kbmbscodefix, kbsurveynew, kbnoloc, kb

↑ Back to the top

Article Info
Article ID : 3004803
Revision : 1
Created on : 1/7/2017
Published on : 10/13/2014
Exists online : False
Views : 177