When you attempt to join a node to a cluster, you may
receive the following error message:
An error occurred
attempting to add this computer to the sponsor cluster database.
Error
0x80071392: The object already exists
Also, the following error may
be logged in the Configuration log (ClCfgSrv.log):
yyyy-mm-dd hh:mm:ss.sss NodeName: (null)
(hr=0x80071392,{BAD76434-CE21-4BA0-A295-3CBFA8C72142},{3222E708-EEF3-4667-8CCE-BB0C9223130E},0,2,1),
(null)
The following error may also be logged in the Cluster log:
00000fd4.00000a30::2001/05/10-19:20:54.359 WARN [NMJOIN]
Failed to create object for node nodename, status 5010.
00000fd4.00000a30::2001/05/10-19:20:54.359 INFO [DM] DmAbortLocalUpdate
Entry
00000fd4.00000a30::2001/05/10-19:20:54.359 INFO [LM]
LogAbortXsaction : Entry, hXsaction=0x001377f8
00000fd4.00000a30::2001/05/10-19:20:54.359 INFO [LM] LogWrite : Entry TrId=398
RmId=5 RmType = 0 Size=0
00000fd4.00000a30::2001/05/10-19:20:54.359 INFO
[LM] LogWrite : Exit returning=0x00000980
00000fd4.00000a30::2001/05/10-19:20:54.359 INFO [LM] LogAbortXsaction : Exit,
returning, dwError=0x00000000
00000fd4.00000a30::2001/05/10-19:20:54.359
INFO [DM] DmpRestartFlusher: Entry
00000fd4.00000a30::2001/05/10-19:20:54.390 INFO [DM] DmAbortLocalUpdate Exit,
returning 0x00000000
00000fd4.00000ffc::2001/05/10-19:20:54.390 INFO [DM]
DmpRegistryFlusher: restarting
00000fd4.00000a30::2001/05/10-19:20:54.390
ERR [GUM] Update routine 17186173 failed with status 5010
00000fd4.00000a30::2001/05/10-19:20:54.406 INFO [GUM] GumpDoUnlockingUpdate
releasing lock ownership
00000fd4.00000a30::2001/05/10-19:20:54.406 WARN
[GUM] Queued lock attempt for send type 2 failed 5010
00000fd4.00000318::2001/05/10-19:21:40.437 INFO [LM] LogFlush: pLog=0x00151d50
writing the 1024 bytes for active page at offset 0x00000800
↑ Back to the top
This problem can occur when you attempt to add a node to a
cluster that had previously been a member of that cluster. You removed the
Cluster service, and then reinstalled it on the node. However, you removed the
Cluster service before you removed the node from the cluster database.
↑ Back to the top
To resolve this problem, start the Cluster Administrator
tool (CluAdmin.exe), right-click the node name that you want to add, and then
click Evict Node. Then, you must re-run the Configuration Wizard and re-add the
node to the cluster.
↑ Back to the top
Microsoft has
confirmed that this is a problem in the Microsoft products that are listed at
the beginning of this article.
↑ Back to the top
If you remove the node, but this problem is not corrected,
you may have to manually remove the Cluster service with the cluster node /force command.
↑ Back to the top