Microsoft KB Archive Search

Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

  1. Home
  2. Description of the Office 2010 hotfix package (Kb2428677-x-none.msp): October 8, 2013

Description of the Office 2010 hotfix package (Kb2428677-x-none.msp): October 8, 2013

View products that this article applies to.

Summary

This article describes the issues that are fixed in the Microsoft Office 2010 hotfix package that is dated October 8, 2013.

↑ Back to the top

INTRODUCTION

Issues that this hotfix package fixes

  • Consider the following scenario:
    • You are in an environment that contains two SharePoint realms that are backed by two authorization providers.
    • You have a document that contains hyperlinks pointing to documents on both realms.
    • You click a link that refers to a realm.
    • You click a link that refers to the second realm.
    In this situation, you receive the following error message:
    There was a problem accessing the site. Try to browse to the site again.
  • When you run a macro that manipulates some tables (for example, the macro populates date information in a table) in Word 2010, it takes longer than expected for the macro to finish running.
  • When an email message contains a table that contains merged cells, and you leave the email message open in the background, Outlook 2010 may crash.
  • When you print an email message that contains OLE objects in Outlook 2010, Outlook 2010 may crash. Additionally, you may receive the following error message:
    There is a problem with the selected printer. You might need to reinstall this printer. Try again, or use a different printer.
  • Assume that you clear the Show white space between pages in Print Layout view check box in Word 2010. When you run a macro to set the bounds of a shape in a document in compatibility mode, the bounds are set incorrectly.
  • When you open some dialog boxes, such as the Find and Replace and Insert Hyperlink dialog boxes, in the Japanese version of Word 2010 on a computer that has Windows 8 installed, the dialog boxes are larger than expected.
  • When you run a macro to obtain or set page setup properties in a document that contains a floating table in Word 2010, you receive the following error message:
    error 4605" - "The LeftMargin method or property is not available because the object refers to a framed paragraph.
  • Consider the following scenario:
    • You insert a table of figures into a document in Word 2010.
    • You enable the Track Changes function.
    • You delete a table of figures that contains a caption in the document.
    • You update the table of figures that you inserted.
    In this situation, the table of figures is not updated correctly.
  • Assume that you set Square, Tight, Behind text, In front of text, Through, or Top and bottom as the Insert/paste pictures as value in the Word Options dialog box in Word 2010. When you insert a picture in a document, the picture is inserted unexpectedly at the top of the page.

↑ Back to the top

More Information

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To install this hotfix package, you must have either Microsoft Office 2010 Service Pack 1 (SP1) or Service Pack 2 (SP2) installed. For more information about Office 2010 SP1 and SP2, click the following article numbers to view the articles in the Microsoft Knowledge Base:
2510690 List of all Office 2010 SP1 packages
2687521 List of all Office 2010 SP2 packages

Restart requirement

You do not have to restart the computer after you install this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

Registry information

Important
Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry for restoration in case problems occur.

After you install this hotfix package, follow these steps, and then restart Word 2010 to enable this hotfix:

  1. Click Start, click Run, type regedit in the Open box, and then click OK.
  2. Locate and then select the following registry subkey:
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Word\Options\
  3. On the Edit menu, point to New, and then click DWORD Value.
  4. Type AnchorPictureAtIp, and then press Enter.
  5. In the Details pane, right-click AnchorPictureAtIp, and then click Modify.
  6. In the Value data box, type 1, and then click OK.
  7. Exit Registry Editor.

File information

This hotfix package may not contain all the files that you must have to fully update a product to the latest build. This hotfix package contains only the files that you must have to resolve the issue that listed in this article.

The global version of this hotfix package uses a Microsoft Windows Installer package to install the hotfix package. The dates and the times for these files are listed in Coordinated Universal Time (UTC) in the following table. When you view the file information, the date is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

x86 version
Download information
File nameFile versionFile sizeDateTime
Kb24286772010-kb2825797-fullfile-x86-glb.exe14.0.7110.50009,968,12019-Sep-201309:07

Microsoft Windows Installer .msp file information
File nameFile versionFile sizeDateTime
Kb2428677-x-none.mspNot Applicable8,680,44818-Sep-201317:28

x64 version
Download information

File nameFile versionFile sizeDateTimePlatform
Kb24286772010-kb2825797-fullfile-x64-glb.exe14.0.7110.500011,923,05619-Sep-201309:07x86

Microsoft Windows Installer .msp file information

File nameFile versionFile sizeDateTime
Kb2428677-x-none.mspNot Applicable10,647,04018-Sep-201317:29



↑ Back to the top

References

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684 Description of the standard terminology that is used to describe Microsoft software updates

↑ Back to the top

Keywords: kb, kbqfe, kbcu, kbsurveynew, kbexpertiseinter, kbhotfixserver, kbhotfixrollup, kbhotfixallversions, kbautohotfix

↑ Back to the top

Article Info
Article ID : 2825797
Revision : 2
Created on : 3/30/2017
Published on : 3/30/2017
Exists online : False
Views : 391