Microsoft KB Archive Search

Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

  1. Home
  2. The "Balance sheet" report (11200) and the "Income statement" report (11201) work incorrectly in the Swedish version of Microsoft Dynamics NAV 2013

The "Balance sheet" report (11200) and the "Income statement" report (11201) work incorrectly in the Swedish version of Microsoft Dynamics NAV 2013

View products that this article applies to.

This article applies to Microsoft Dynamics NAV for the Swedish (se) language locale.

↑ Back to the top

Symptoms

When you run the Balance sheet report (11200) or the Income statement report (11201) in the Swedish version of Microsoft Dynamics NAV 2013, there are empty lines on the report.

↑ Back to the top

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2013 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

↑ Back to the top

Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure. However, they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Dynamics NAV client users are logged off the system. This includes Microsoft Dynamics NAV Application Server (NAS) services. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
  • The Modify permission for the object that you will be changing.
  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015

    object.
Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.

To resolve this problem, use the following steps:
  1. Change the code in the Global Variables in the Balance sheet report (11200) as follows:
    Existing code 1
    ...
    <Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition">

    // Delete the following line.
    <AutoRefresh>0</AutoRefresh>
    // End of the deleted line.

    <DataSources>
    ...
    Replacement code 1
    ...
    <Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition">
    <DataSources>
    ...
    Existing code 2
    ...
    </ConnectionProperties>

    // Delete the following line.
    <rd:SecurityType>None</rd:SecurityType>
    // End of the deleted line.

    <rd:DataSourceID>078b3105-54dd-41a2-b2cc-97cc545456f5</rd:DataSourceID>
    ...
    Replacement code 2
    ...
    </ConnectionProperties>
    <rd:DataSourceID>078b3105-54dd-41a2-b2cc-97cc545456f5</rd:DataSourceID>
    ...
    Existing code 3
    ...
    <DataSet Name="DataSet_Result">

    // Delete the following lines.
    <Query>
    <DataSourceName>DataSource</DataSourceName>
    <CommandText />
    </Query>
    // End of the deleted lines.

    <Fields>
    ...
    Replacement code 3
    ...
    <DataSet Name="DataSet_Result">
    <Fields>
    ...
    Existing code 4
    ...
    </Fields>
    <rd:DataSetInfo>
    ...
    Replacement code 4
    ...
    </Fields>

    // Add the following lines.
    <Query>
    <DataSourceName>DataSource</DataSourceName>
    <CommandText />
    </Query>
    // End of the added lines.

    <rd:DataSetInfo>
    ...
    Existing code 5
    ...
    </DataSets>

    // Delete the following lines.
    <Code>Public Function BlankZero(ByVal Value As Decimal)
    if Value = 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankPos(ByVal Value As Decimal)
    if Value &gt; 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankZeroAndPos(ByVal Value As Decimal)
    if Value &gt;= 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankNeg(ByVal Value As Decimal)
    if Value &lt; 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankNegAndZero(ByVal Value As Decimal)
    if Value &lt;= 0 then
    Return ""
    end if
    Return Value
    End Function
    </Code>
    <Language>=User!Language</Language>
    <ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
    <rd:ReportUnitType>Invalid</rd:ReportUnitType>
    <rd:ReportID>3601b3ac-04bd-4ad8-9e53-8b1236ed6d8f</rd:ReportID>
    // End of the deleted lines.

    <Body>
    ...
    Replacement code 5
    ...
    </DataSets>
    <Body>
    ...
    Existing code 6
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 6
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the addded line.

    </Paragraph>
    ...
    Existing code 7
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>1.575cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 7
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.59055in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 8
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>6.525cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 8
    ...
    <TablixColumn>

    // Add the following line.
    <Width>2.3622in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 9
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>3.4cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 9
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.90551in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 10
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>3.6cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 10
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.90551in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 11
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>2.95cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 11
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.90551in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 12
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>0.2cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 12
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.07874in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 13
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>0.2cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 13
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.07874in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 14
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>0.2cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 14
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.07874in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 15
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>0.2cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 15
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.07874in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 16
    ...
    <TablixRow>

    // Delete the following line.
    <Height>0.423cm</Height>
    // End of the deleted line.

    <TablixCells>
    ...
    Replacement code 16
    ...
    <TablixRow>

    // Add the following line.
    <Height>0.16654in</Height>
    // End of the added line.

    <TablixCells>
    ...
    Existing code 17
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 17
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 18
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>0cm</Left>
    <Height>0.423cm</Height>
    <Width>1.5cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 18
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 19
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 19
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 20
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>1.65cm</Left>
    <Height>0.423cm</Height>
    <Width>6cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 20
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 21
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>7.65cm</Left>
    <Height>0.423cm</Height>
    <Width>3.15cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 21
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 22
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>12.15cm</Left>
    <Height>0.423cm</Height>
    <Width>2.3cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 22
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 23
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>14.85cm</Left>
    <Height>0.423cm</Height>
    <Width>3.15cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 23
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 24
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 24
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 25
    ...
    <TablixRow>

    // Delete the following line.
    <Height>0.423cm</Height>
    // End of the deleted line.

    <TablixCells>
    ...
    Replacement code 25
    ...
    <TablixRow>

    // Add the following line.
    <Height>0.16654in</Height>
    // End of the added line.

    <TablixCells>
    ...
    Existing code 26
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 26
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 27
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>0cm</Left>
    <Height>0.423cm</Height>
    <Width>1.5cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 27
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 28
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 28
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 29
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>1.65cm</Left>
    <Height>0.423cm</Height>
    <Width>6cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 29
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 30
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 30
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 31
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>8.55cm</Left>
    <Height>0.423cm</Height>
    <Width>2.3cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 31
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 32
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 32
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 33
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>12.15cm</Left>
    <Height>0.423cm</Height>
    <Width>2.3cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 33
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 34
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 34
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 35
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>15.75cm</Left>
    <Height>0.423cm</Height>
    <Width>2.3cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 35
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 36
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 36
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 37
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 37
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 38
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 38
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 39
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 39
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 40
    ...
    </TablixMembers>
    <DataElementName>Detail_Collection</DataElementName>
    ...
    Replacement code 40
    ...
    </TablixMembers>

    // Add the following lines.
    <Visibility>
    <Hidden>=IIF((Fields!G_L_Account___Balance_at_Date___G_L_Account___Net_Change_.Value&lt;&gt; 0),False,True )</Hidden>
    </Visibility>
    // End of the added lines.

    <DataElementName>Detail_Collection</DataElementName>
    ...
    Existing code 41
    ...
    <Height>0.846cm</Height>
    </Tablix>
    ...
    Replacement code 41
    ...
    <Height>0.846cm</Height>

    // Add the following lines.
    <Width>15.2cm</Width>
    <ZIndex>1</ZIndex>
    <Style />
    // End of the added lines.

    </Tablix>
    ...
    Existing code 42
    ...
    <Height>1.692cm</Height>
    </Body>
    ...
    Replacement code 42
    ...
    <Height>1.692cm</Height>

    // Add the following line.
    <Style />
    // End of the added line.

    </Body>
    ...
    Existing code 43
    ...
    </Body>
    <Width>18.85cm</Width>
    ...
    Replacement code 43
    ...
    </Body>

    // Add the following lines.
    <Code>Public Function BlankZero(ByVal Value As Decimal)
    if Value = 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankPos(ByVal Value As Decimal)
    if Value &gt; 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankZeroAndPos(ByVal Value As Decimal)
    if Value &gt;= 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankNeg(ByVal Value As Decimal)
    if Value &lt; 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankNegAndZero(ByVal Value As Decimal)
    if Value &lt;= 0 then
    Return ""
    end if
    Return Value
    End Function
    </Code>
    // End of the added lines.

    <Width>18.85cm</Width>
    ...
    Existing code 44
    ...
    <Width>3.25cm</Width>
    <Style>
    ...
    Replacement code 44
    ...
    <Width>3.25cm</Width>

    // Add the following line.
    <ZIndex>1</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 45
    ...
    <Width>3.15cm</Width>
    <Style>
    ...
    Replacement code 45
    ...
    <Width>3.15cm</Width>

    // Add the following line.
    <ZIndex>2</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 46
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 46
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 47
    ...
    <Width>7.5cm</Width>
    <Style>
    ...
    Replacement code 47
    ...
    <Width>7.5cm</Width>

    // Add the following line.
    <ZIndex>3</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 48
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 48
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 49
    ...
    <Width>7.5cm</Width>
    <Style>
    ...
    Replacement code 49
    ...
    <Width>7.5cm</Width>

    // Add the following line.
    <ZIndex>4</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 50
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 50
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 51
    ...
    <Width>7.5cm</Width>
    <Style>
    ...
    Replacement code 51
    ...
    <Width>7.5cm</Width>

    // Add the following line.
    <ZIndex>5</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 52
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 52
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 53
    ...
    <Width>0.75cm</Width>
    <Style>
    ...
    Replacement code 53
    ...
    <Width>0.75cm</Width>

    // Add the following line.
    <ZIndex>6</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 54
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 54
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 55
    ...
    <BottomMargin>2cm</BottomMargin>
    </Page>
    ...
    Replacement code 55
    ...
    <BottomMargin>2cm</BottomMargin>

    // Add the following line.
    <Style />
    // End of the added line.

    </Page>
    ...
    Existing code 56
    ...
    </Page>
    </Report>
    ...
    Replacement code 56
    ...
    </Page>

    // Add the following lines.
    <Language>=User!Language</Language>
    <ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
    <rd:ReportID>3601b3ac-04bd-4ad8-9e53-8b1236ed6d8f</rd:ReportID>
    <rd:ReportUnitType>Cm</rd:ReportUnitType>
    // End of the added lines.

    </Report>
    ...
  2. Change the code in the Global Variables in the Income statement report (11201) as follows:
    Existing code 1
    ...
    <Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition">

    // Delete the following line.
    <AutoRefresh>0</AutoRefresh>
    // End of the deleted line.

    <DataSources>
    ...
    Replacement code 1
    ...
    <Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition">
    <DataSources>
    ...
    Existing code 2
    ...
    </ConnectionProperties>

    // Delete the following line.
    <rd:SecurityType>None</rd:SecurityType>
    // End of the deleted line.

    <rd:DataSourceID>8ebf26e0-0b0c-48b1-aba7-282651564ae8</rd:DataSourceID>
    ...
    Replacement code 2
    ...
    </ConnectionProperties>
    <rd:DataSourceID>8ebf26e0-0b0c-48b1-aba7-282651564ae8</rd:DataSourceID>
    ...
    Existing code 3
    ...
    <DataSet Name="DataSet_Result">

    // Delete the following lines.
    <Query>
    <DataSourceName>DataSource</DataSourceName>
    <CommandText />
    </Query>
    // End of the deleted lines.

    <Fields>
    ...
    Replacement code 3
    ...
    <DataSet Name="DataSet_Result">
    <Fields>
    ...
    Existing code 4
    ...
    </Fields>
    <rd:DataSetInfo>
    ...
    Replacement code 4
    ...
    </Fields>

    // Add the following lines.
    <Query>
    <DataSourceName>DataSource</DataSourceName>
    <CommandText />
    </Query>
    // End of the added lines.

    <rd:DataSetInfo>
    ...
    Existing code 5
    ...
    </DataSets>

    // Delete the following lines.
    <Code>Public Function BlankZero(ByVal Value As Decimal)
    if Value = 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankPos(ByVal Value As Decimal)
    if Value &gt; 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankZeroAndPos(ByVal Value As Decimal)
    if Value &gt;= 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankNeg(ByVal Value As Decimal)
    if Value &lt; 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankNegAndZero(ByVal Value As Decimal)
    if Value &lt;= 0 then
    Return ""
    end if
    Return Value
    End Function
    </Code>
    <Language>=User!Language</Language>
    <ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
    <rd:ReportUnitType>Invalid</rd:ReportUnitType>
    <rd:ReportID>7ca5956a-9e85-4253-98fd-d228e8432978</rd:ReportID>
    // End of the deleted lines.

    <Body>
    ...
    Replacement code 5
    ...
    </DataSets>
    <Body>
    ...
    Existing code 6
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 6
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the addded line.

    </Paragraph>
    ...
    Existing code 7
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>1.575cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 7
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.59055in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 8
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>6.3cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 8
    ...
    <TablixColumn>

    // Add the following line.
    <Width>2.3622in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 9
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>2.25cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 9
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.70866in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 10
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>3cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 10
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.70866in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 11
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>3cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 11
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.70866in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 12
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>2.025cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 12
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.70866in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 13
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>0.2cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 13
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.07874in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 14
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>0.2cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 14
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.07874in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 15
    ...
    <TablixColumn>

    // Delete the following line.
    <Width>0.2cm</Width>
    // End of the deleted line.

    </TablixColumn>
    ...
    Replacement code 15
    ...
    <TablixColumn>

    // Add the following line.
    <Width>0.07874in</Width>
    // End of the added line.

    </TablixColumn>
    ...
    Existing code 16
    ...
    <TablixRow>

    // Delete the following line.
    <Height>0.423cm</Height>
    // End of the deleted line.

    <TablixCells>
    ...
    Replacement code 16
    ...
    <TablixRow>

    // Add the following line.
    <Height>0.16654in</Height>
    // End of the added line.

    <TablixCells>
    ...
    Existing code 17
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 17
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 18
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 18
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 19
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>8.1cm</Left>
    <Height>0.423cm</Height>
    <Width>4.05cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 19
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 20
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 20
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 21
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 21
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 22
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>14.1cm</Left>
    <Height>0.423cm</Height>
    <Width>4.05cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 22
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 23
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 23
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 24
    ...
    <TablixRow>

    // Delete the following line.
    <Height>0.423cm</Height>
    // End of the deleted line.

    <TablixCells>
    ...
    Replacement code 24
    ...
    <TablixRow>

    // Add the following line.
    <Height>0.16654in</Height>
    // End of the added line.

    <TablixCells>
    ...
    Existing code 25
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 25
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 26
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0.846cm</Top>
    <Left>0cm</Left>
    <Height>0.423cm</Height>
    <Width>1.5cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 26
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 27
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 27
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 28
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0.846cm</Top>
    <Left>1.65cm</Left>
    <Height>0.423cm</Height>
    <Width>6cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 28
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 29
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0.846cm</Top>
    <Left>8.1cm</Left>
    <Height>0.423cm</Height>
    <Width>1.8cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 29
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 30
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0.846cm</Top>
    <Left>10.35cm</Left>
    <Height>0.423cm</Height>
    <Width>1.8cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 30
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 31
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0.846cm</Top>
    <Left>14.1cm</Left>
    <Height>0.423cm</Height>
    <Width>1.8cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 31
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 32
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0.846cm</Top>
    <Left>16.35cm</Left>
    <Height>0.423cm</Height>
    <Width>1.8cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 32
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 33
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 33
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 34
    ...
    <TablixRow>

    // Delete the following line.
    <Height>0.423cm</Height>
    // End of the deleted line.

    <TablixCells>
    ...
    Replacement code 34
    ...
    <TablixRow>

    // Add the following line.
    <Height>0.16654in</Height>
    // End of the added line.

    <TablixCells>
    ...
    Existing code 35
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 35
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 36
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>0cm</Left>
    <Height>0.423cm</Height>
    <Width>1.5cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 36
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 37
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 37
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 38
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>1.65cm</Left>
    <Height>0.423cm</Height>
    <Width>6cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 38
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 39
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 39
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 40
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>8.1cm</Left>
    <Height>0.423cm</Height>
    <Width>1.8cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 40
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 41
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 41
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 42
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>10.35cm</Left>
    <Height>0.423cm</Height>
    <Width>1.8cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 42
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 43
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 43
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 44
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>14.1cm</Left>
    <Height>0.423cm</Height>
    <Width>1.8cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 44
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 45
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 45
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 46
    ...
    </Paragraphs>

    // Delete the following lines.
    <Top>0cm</Top>
    <Left>16.35cm</Left>
    <Height>0.423cm</Height>
    <Width>1.8cm</Width>
    // End of the deleted lines.

    <Style>
    ...
    Replacement code 46
    ...
    </Paragraphs>
    <Style>
    ...
    Existing code 47
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 47
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 48
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 48
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 49
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 49
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 50
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 50
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 51
    ...
    </TablixMembers>
    <DataElementName>Detail_Collection</DataElementName>
    ...
    Replacement code 51
    ...
    </TablixMembers>

    // Add the following lines.
    <Visibility>
    <Hidden>=IIF((Fields!G_L_Account___Net_Change_.Value&lt;&gt; 0),False,True )</Hidden>
    </Visibility>
    // End of the added lines.

    <DataElementName>Detail_Collection</DataElementName>
    ...
    Existing code 52
    ...
    <Height>1.269cm</Height>
    </Tablix>
    ...
    Replacement code 52
    ...
    <Height>1.269cm</Height>

    // Add the following lines.
    <Width>15.5cm</Width>
    <ZIndex>1</ZIndex>
    <Style />
    // End of the added lines.

    </Tablix>
    ...
    Existing code 53
    ...
    <Height>2.115cm</Height>
    </Body>
    ...
    Replacement code 53
    ...
    <Height>2.115cm</Height>

    // Add the following line.
    <Style />
    // End of the added line.

    </Body>
    ...
    Existing code 54
    ...
    </Body>

    // Delete the following line.
    <Width>18.95cm</Width>
    // End of the deleted line.

    <Page>
    ...
    Replacement code 54
    ...
    </Body>

    // Add the following lines.
    <Code>Public Function BlankZero(ByVal Value As Decimal)
    if Value = 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankPos(ByVal Value As Decimal)
    if Value &gt; 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankZeroAndPos(ByVal Value As Decimal)
    if Value &gt;= 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankNeg(ByVal Value As Decimal)
    if Value &lt; 0 then
    Return ""
    end if
    Return Value
    End Function

    Public Function BlankNegAndZero(ByVal Value As Decimal)
    if Value &lt;= 0 then
    Return ""
    end if
    Return Value
    End Function
    </Code>
    <Width>22.775cm</Width>
    // End of the added lines.

    <Page>
    ...
    Existing code 55
    ...
    <Width>3.25cm</Width>
    <Style>
    ...
    Replacement code 55
    ...
    <Width>3.25cm</Width>

    // Add the following line.
    <ZIndex>1</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 56
    ...
    <Width>3.15cm</Width>
    <Style>
    ...
    Replacement code 56
    ...
    <Width>3.15cm</Width>

    // Add the following line.
    <ZIndex>2</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 57
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 57
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 58
    ...
    <Width>7.5cm</Width>
    <Style>
    ...
    Replacement code 58
    ...
    <Width>7.5cm</Width>

    // Add the following line.
    <ZIndex>3</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 59
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 59
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 60
    ...
    <Width>7.5cm</Width>
    <Style>
    ...
    Replacement code 60
    ...
    <Width>7.5cm</Width>

    // Add the following line.
    <ZIndex>4</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 61
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 61
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 62
    ...
    <Width>7.5cm</Width>
    <Style>
    ...
    Replacement code 62
    ...
    <Width>7.5cm</Width>

    // Add the following line.
    <ZIndex>5</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 63
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 63
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 64
    ...
    <Width>0.75cm</Width>
    <Style>
    ...
    Replacement code 64
    ...
    <Width>0.75cm</Width>

    // Add the following line.
    <ZIndex>6</ZIndex>
    // End of the added line.

    <Style>
    ...
    Existing code 65
    ...
    </TextRuns>
    </Paragraph>
    ...
    Replacement code 65
    ...
    </TextRuns>

    // Add the following line.
    <Style />
    // End of the added line.

    </Paragraph>
    ...
    Existing code 66
    ...
    <BottomMargin>2cm</BottomMargin>
    </Page>
    ...
    Replacement code 66
    ...
    <BottomMargin>2cm</BottomMargin>

    // Add the following line.
    <Style />
    // End of the added line.

    </Page>
    ...
    Existing code 67
    ...
    </Page>
    </Report>
    ...
    Replacement code 67
    ...
    </Page>

    // Add the following lines.
    <Language>=User!Language</Language>
    <ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
    <rd:ReportID>7ca5956a-9e85-4253-98fd-d228e8432978</rd:ReportID>
    <rd:ReportUnitType>Cm</rd:ReportUnitType>
    // End of the added lines.

    </Report>
    ...

Prerequisites

You must have the Swedish version of Microsoft Dynamics NAV 2013 installed to apply this hotfix.

Removal information

You cannot remove this hotfix.

↑ Back to the top

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

↑ Back to the top

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Usefor other considerations.

↑ Back to the top

Keywords: kbqfe, kbmbspartner, kbmbsmigrate, kbmbscodefix, kbsurveynew, kbmbsquickpub, kbnoloc, kb

↑ Back to the top

Article Info
Article ID : 2802079
Revision : 1
Created on : 1/7/2017
Published on : 3/28/2013
Exists online : False
Views : 271