Microsoft KB Archive Search

Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

  1. Home
  2. The Base values and the Amount values in VAT entries are incorrect in certain scenario in the Croatian version of Microsoft Dynamics NAV 2009 R2

The Base values and the Amount values in VAT entries are incorrect in certain scenario in the Croatian version of Microsoft Dynamics NAV 2009 R2

View products that this article applies to.

This article applies to Microsoft Dynamics NAV for the Croatian (hr) language locale.

↑ Back to the top

Symptoms

Consider the following scenario in the Croatian version of Microsoft Dynamics NAV 2009 R2:
  • You apply hotfix 2537945.
    For more information, click the following article number to view the article in the Microsoft Knowledge Base:
    2537945 The values of "VAT Base (Non Deductible)" field and "VAT Amount (Non Deductible)" field are incorrect on the posted VAT entries in the Eastern European version of Microsoft Dynamics NAV R2 and Microsoft Dynamics NAV 2009 SP1
  • You select the Unrealized VAT check box in the General Ledger Setup dialog box.
  • You select the Percentage value in the Unrealized VAT Type field in the VAT Posting Setup dialog box.
  • You select the Allow Non Deductable VAT check box.
  • You create and post a purchase invoice.
  • You pay the invoice by three partial payments.
  • You post the three payments.
In this scenario, the Base values and the Amount values in the posted value-added tax (VAT) entries are incorrect.

↑ Back to the top

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

↑ Back to the top



Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
  • The Modify permission for the object that you will be changing.
  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.


Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, change the code in the VendUnrealizedVAT function in the Gen. Jnl.-Post Line codeunit (12) as follows:
Existing code 1
...
VATBaseSrcCurr := VATEntry2."Src.-Curr. Rem. Unreal. Base";
END;
END ELSE BEGIN

// Delete the following lines.
VATAmount := ROUND(VATEntry2."Unrealized Amount" * VATPart);
VATBase := ROUND(VATEntry2."Unrealized Base" * VATPart);
// End of the lines. 

VATAmountAddCurr :=
ROUND(
...
Replacement code 1
...
VATBaseSrcCurr := VATEntry2."Src.-Curr. Rem. Unreal. Base";
END;
END ELSE BEGIN

// Add the following lines.
VATAmount := ROUND(VATEntry2."Remaining Unrealized Amount" * VATPart);
VATBase := ROUND(VATEntry2."Remaining Unrealized Base" * VATPart);
// End of the lines. 

VATAmountAddCurr :=
ROUND(
...
Existing code 2
...
VATAmount := ROUND(VATEntry2."Unrealized Amount" * VATPart);
VATBase := ROUND(VATEntry2."Unrealized Base" * VATPart);
VATAmountAddCurr :=
ROUND(

// Delete the following line. 
VATEntry2."Add.-Currency Unrealized Amt." * VATPart,

AddCurrency."Amount Rounding Precision");
VATBaseAddCurr :=
ROUND(

// Delete the following line. 
VATEntry2."Add.-Currency Unrealized Base" * VATPart,

AddCurrency."Amount Rounding Precision");
IF VATEntry2."Import of Services" AND (VendLedgEntry2."Currency Code" <> '') THEN BEGIN
VATAmountSrcCurr :=
ROUND(

// Delete the following line. 
VATEntry2."Src.-Curr. Unrealized Amount" * VATPart,

SrcCurrency."Amount Rounding Precision");
VATBaseSrcCurr :=
ROUND(

// Delete the following line. 
VATEntry2."Src.-Curr. Unrealized Base" * VATPart,

SrcCurrency."Amount Rounding Precision");
END;
...
Replacement code 2
...
VATAmount := ROUND(VATEntry2."Unrealized Amount" * VATPart);
VATBase := ROUND(VATEntry2."Unrealized Base" * VATPart);
VATAmountAddCurr :=
ROUND(

// Add the following line. 
VATEntry2."Add.-Curr. Rem. Unreal. Amount" * VATPart, 

AddCurrency."Amount Rounding Precision");
VATBaseAddCurr :=
ROUND(

// Add the following line. 
VATEntry2."Add.-Curr. Rem. Unreal. Base" * VATPart,

AddCurrency."Amount Rounding Precision");
IF VATEntry2."Import of Services" AND (VendLedgEntry2."Currency Code" <> '') THEN BEGIN
VATAmountSrcCurr :=
ROUND(

// Add the following line. 
VATEntry2."Src.-Curr. Rem. Unreal. Amt." * VATPart,

SrcCurrency."Amount Rounding Precision");
VATBaseSrcCurr :=
ROUND(

// Add the following line. 
VATEntry2."Src.-Curr. Rem. Unreal. Base" * VATPart, 

SrcCurrency."Amount Rounding Precision");
END;
...

Prerequisites

You must have the Croatian version of Microsoft Dynamics NAV 2009 R2 installed to apply this hotfix.

Removal information

You cannot remove this hotfix.

↑ Back to the top

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

↑ Back to the top

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

↑ Back to the top

Keywords: kbqfe, kbmbsquickpub, kbmbspartner, kbmbsmigrate, kbsurveynew, kbnoloc, kbmbscodefix, kb

↑ Back to the top

Article Info
Article ID : 2554206
Revision : 4
Created on : 9/20/2018
Published on : 9/20/2018
Exists online : False
Views : 229