Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

You cannot open the Production Journals for a production order when you partially pick the components in a Direct Put-away and Pick location in Microsoft Dynamics NAV 2009 SP1 or in Microsoft Dynamics NAV 2009 R2


View products that this article applies to.

This article applies to Microsoft Dynamics NAV for all language locales.

↑ Back to the top


Symptoms

Assume that you have a production order for an item in Microsoft Dynamics NAV. When you partly pick the components in a Direct Put-away and Pick location, you cannot open the Production Journals for the production order.
This problem occurs in the following products:
  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)
  • Microsoft Dynamics NAV 2009 R2

↑ Back to the top


Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.


↑ Back to the top




Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
  • The Modify permission for the object that you will be changing.
  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.


Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:
  1. Create a new AdjustQtyToQtyPicked function in the Prod. Order Component table (5407) as follows:

    Add a parameter for the function as follows:
    • Var: Yes
    • Name: QtyToPost
    • DataType: Decimal
    Add a local variable for the function as follows:
    • Name: AdjustedQty
    • DataType: Decimal
    Add the code for the function as follows:
    AdjustedQty := "Qty. Picked" - ("Expected Quantity" - "Remaining Quantity");

    IF QtyToPost > AdjustedQty THEN
    QtyToPost := AdjustedQty;
    END;
  2. Change the code in the CreateConsumpJnlLine function in the Calc. Consumption report (5405) as follows:
    Existing code
    ...
    IF Location.GET(LocationCode) AND Location."Require Pick" AND Location."Require Shipment" THEN

    // Delete the following line.
    AdjustQtyToQtyPicked(QtyToPost);
    // End of the deleted line.
    ...
    Replacement code
    ...
    IF Location.GET(LocationCode) AND Location."Require Pick" AND Location."Require Shipment" THEN

    // Add the following line.
    "Prod. Order Component".AdjustQtyToQtyPicked(QtyToPost);
    // End of the added line.
    ...
  3. Delete the AdjustQtyToQtyPicked function in the Calc. Consumption report (5405).
  4. Add a local variable in the InsertConsumptionJnlLine function in the Production Journal Mgt codeunit (5510), and then specify the variable as follows:
    • Name: Location
    • DataType: Record
    • Subtype: Location
  5. Change the code in the InsertConsumptionJnlLine function in the Production Journal Mgt codeunit (5510) as follows:
    Existing code
    ...
    IF "Flushing Method" <> "Flushing Method"::Manual THEN
    NeededQty := 0

    // Delete the following line.
    ELSE
    // End of the deleted line.

    NeededQty := GetNeededQty(CalcBasedOn,TRUE);

    ItemJnlLine.INIT;
    ...
    Replacement code
    ...
    IF "Flushing Method" <> "Flushing Method"::Manual THEN
    NeededQty := 0

    // Add the following line.
    ELSE BEGIN
    // End of the added line.

    NeededQty := GetNeededQty(CalcBasedOn,TRUE);

    // Add the following lines.
    IF "Location Code" <> Location.Code THEN
    IF NOT Location.GET("Location Code") THEN
    CLEAR(Location);
    IF Location."Require Shipment" AND Location."Require Pick" THEN
    AdjustQtyToQtyPicked(NeededQty);
    END;
    // End of the added lines.

    ItemJnlLine.INIT;
    ...

Prerequisites

You must have one of the following products installed to apply this hotfix:
  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)
  • Microsoft Dynamics NAV 2009 R2


Removal information

You cannot remove this hotfix.

↑ Back to the top


Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

↑ Back to the top


References

VSTF DynamicsNAV SE: 252458

↑ Back to the top


Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

↑ Back to the top


Keywords: kbnoloc, kbmbsquickpub, kbsurveynew, kbqfe, kbmbsmigrate, kbmbspartner, kb, kbmbscodefix

↑ Back to the top

Article Info
Article ID : 2536336
Revision : 1
Created on : 1/7/2017
Published on : 9/6/2011
Exists online : False
Views : 205