This hotfix is also available at
Microsoft Update Catalog.
The following hotfix resolves an issue in which the storage test incorrectly runs on disks that are online and not in the
Available Storage group.
The error and warning messages that are mentioned in the "Symptoms" section may also occur because of other issues such as storage problems or an incorrect configuration. Therefore, you should investigate other events, check the storage configuration, or contact your storage vendor if this issue still occurs after you install the following hotfix.
Hotfix information
A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem.
If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, submit a request to Microsoft Customer Service and Support to obtain the hotfix.
Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site: Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.Prerequisites
To apply this hotfix, you must be running Windows Server 2008 R2 Service Pack 1 (SP1).
For more information about how to obtain a Windows 7 or Windows Server 2008 R2 service pack, click the following article number to view the article in the Microsoft Knowledge Base:
976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2
Registry information
To use the hotfix in this package, you do not have to make any changes to the registry.
Restart requirement
You do not have to restart the computer after you apply this hotfix.Hotfix replacement information
This hotfix does not replace a previously released hotfix.File information
The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.
Windows Server 2008 R2 file information notes
Important Windows 7 hotfixes and Windows Server 2008 R2 hotfixes are included in the same packages. However, hotfixes on the Hotfix Request page are listed under both operating systems. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under "Windows 7/Windows Server 2008 R2" on the page. Always refer to the "Applies To" section in articles to determine the actual operating system that each hotfix applies to.
- The files that apply to a specific product, SR_Level (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table.
Version | Product | SR_Level | Service branch |
---|
6.1.760 1. 17xxx | Windows Server 2008 R2 | SP1 | GDR |
6.1.760 1. 21xxx | Windows Server 2008 R2 | SP1 | LDR |
- The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the "Additional file information for Windows Server 2008 R2" section. MUM and MANIFEST files, and the associated security catalog (.cat) files, are extremely important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.
For all supported x64-based versions of Windows Server 2008 R2
File name | File version | File size | Date | Time | Platform |
---|
Failoverclusters.agent.interop.dll | 6.1.7601.17514 | 11,776 | 20-Nov-2010 | 13:39 | x64 |
Failoverclusters.validation.bestpracticetests.dll | 6.1.7601.21710 | 131,072 | 22-Apr-2011 | 19:59 | x86 |
Failoverclusters.validation.common.dll | 6.1.7601.21710 | 15,872 | 22-Apr-2011 | 19:59 | x86 |
Failoverclusters.validation.generaltests.dll | 6.1.7601.21710 | 278,528 | 22-Apr-2011 | 19:59 | x86 |
Failoverclusters.validation.storagetests.dll | 6.1.7601.21710 | 165,376 | 22-Apr-2011 | 19:59 | x64 |
Failoverclusters.validation.wizard.dll | 6.1.7601.21710 | 163,840 | 22-Apr-2011 | 19:59 | x86 |
For all supported IA-64-based versions of Windows Server 2008 R2
File name | File version | File size | Date | Time | Platform |
---|
Failoverclusters.agent.interop.dll | 6.1.7601.17514 | 11,776 | 20-Nov-2010 | 10:35 | IA-64 |
Failoverclusters.validation.bestpracticetests.dll | 6.1.7601.21710 | 131,072 | 22-Apr-2011 | 18:56 | x86 |
Failoverclusters.validation.common.dll | 6.1.7601.21710 | 15,872 | 22-Apr-2011 | 18:56 | x86 |
Failoverclusters.validation.generaltests.dll | 6.1.7601.21710 | 278,528 | 22-Apr-2011 | 18:56 | x86 |
Failoverclusters.validation.storagetests.dll | 6.1.7601.21710 | 178,176 | 22-Apr-2011 | 18:56 | IA-64 |
Failoverclusters.validation.wizard.dll | 6.1.7601.21710 | 163,840 | 22-Apr-2011 | 18:56 | x86 |