Microsoft KB Archive Search

Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

  1. Home
  2. The PAN No. field is not updated in the TDS Entry and in the 26Q/27Q form by using the new vendor PAN number in the Indian version of Microsoft Dynamics NAV 2009 SP1

The PAN No. field is not updated in the TDS Entry and in the 26Q/27Q form by using the new vendor PAN number in the Indian version of Microsoft Dynamics NAV 2009 SP1

View products that this article applies to.

This article applies to Microsoft Dynamics NAV for the Indian (in) language locale.

↑ Back to the top

Symptoms

You change the value in the PAN No. filed in the vendor card in Financial Management in the Indian version of Microsoft Dynamics NAV 2009 Service Pack 1 (SP1). Then, you run the Update P.A.N Status function in Tax deducted at Source (TDS). However, the PAN No. field is not updated in the TDS Entry and in the 26Q/27Q form by using the new vendor PAN number.

↑ Back to the top

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 5.0 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

↑ Back to the top



Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
  • The Modify permission for the object that you will be changing.
  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.


Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, change the code in the Update P.A.N. Status report (13712) as follows:
Existing code 1
...
      ProcessingOnly=Yes;
      OnPreReport=BEGIN
                    TDSEntry.RESET;
                    TDSEntry.SETCURRENTKEY("Party Type","Party Code","Posting Date");

// Delete the following lines.
                  IF PartyType = PartyType::Vendor THEN 
                     TDSEntry.SETRANGE("Party Type",PartyType::Vendor) 
                   ELSE 
                    TDSEntry.SETRANGE("Party Type",PartyType::Party); 
// End of the deleted lines.

                    IF PartyCode <> '' THEN
                      TDSEntry.SETRANGE("Party Code",PartyCode);
                    TDSEntry.SETRANGE("Posting Date",StartDate,EndDate);
                    IF TDSEntry.FINDSET THEN
                      REPEAT
...
Replacement code 1
...
      ProcessingOnly=Yes;
      OnPreReport=BEGIN
                    TDSEntry.RESET;
                    TDSEntry.SETCURRENTKEY("Party Type","Party Code","Posting Date");
   
// Add the following lines.
                   IF PartyType = PartyType::Vendor THEN 
                     TDSEntry.SETRANGE("Party Type",TDSEntry."Party Type"::Vendor) 
                   ELSE 
                     TDSEntry.SETRANGE("Party Type",TDSEntry."Party Type"::Party); 
// End of the added lines.

                    IF PartyCode <> '' THEN
                      TDSEntry.SETRANGE("Party Code",PartyCode);
                    TDSEntry.SETRANGE("Posting Date",StartDate,EndDate);
                    IF TDSEntry.FINDSET THEN
                      REPEAT
...

Existing code 2
...
                         TDSEntry.MODIFY;
                      UNTIL TDSEntry.NEXT = 0;
  
                    Form26Q27QEntry.RESET;
                    Form26Q27QEntry.SETCURRENTKEY("Party Type","Party Code","Posting Date");

// Delete the following lines.
                   IF PartyType = PartyType::Vendor THEN 
                    Form26Q27QEntry.SETRANGE("Party Type",PartyType::Vendor) 
                     ELSE 
                     Form26Q27QEntry.SETRANGE("Party Type",PartyType::Party); 
// End of the deleted lines.

                    IF PartyCode <> '' THEN
                      Form26Q27QEntry.SETRANGE("Party Code",PartyCode);
                    Form26Q27QEntry.SETRANGE("Posting Date",StartDate,EndDate);
                    IF Form26Q27QEntry.FINDSET THEN
                      REPEAT
...
Replacement code 2
...
                        TDSEntry.MODIFY;
                      UNTIL TDSEntry.NEXT = 0;
  
                    Form26Q27QEntry.RESET;
                    Form26Q27QEntry.SETCURRENTKEY("Party Type","Party Code","Posting Date");
  
// Add the following lines.  
                   IF PartyType = PartyType::Vendor THEN
                     Form26Q27QEntry.SETRANGE("Party Type",Form26Q27QEntry."Party Type"::Vendor) 
                   ELSE 
                     Form26Q27QEntry.SETRANGE("Party Type",Form26Q27QEntry."Party Type"::Party);
// End of the added lines.

                    IF PartyCode <> '' THEN
                      Form26Q27QEntry.SETRANGE("Party Code",PartyCode);
                    Form26Q27QEntry.SETRANGE("Posting Date",StartDate,EndDate);
                    IF Form26Q27QEntry.FINDSET THEN
                      REPEAT
...

Prerequisites

You must have the Indian version of Microsoft Dynamics NAV 2009 SP1 installed to apply this hotfix.

Removal information

You cannot remove this hotfix.

↑ Back to the top

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

↑ Back to the top

References

VSTF DynamicsNAV SE: 251824

↑ Back to the top

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

↑ Back to the top

Keywords: kbqfe, kbmbsquickpub, kbmbsmigrate, kbmbspartner, kbsurveynew, kbmbscodefix, kb

↑ Back to the top

Article Info
Article ID : 2514952
Revision : 5
Created on : 9/21/2018
Published on : 9/21/2018
Exists online : False
Views : 216