Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

The document number is not incremented on a journal if the first line is an empty line in Microsoft Dynamics NAV


View products that this article applies to.

This article applies to Microsoft Dynamics NAV for all countries and all language locales.

↑ Back to the top


Symptoms

If the first line in the journal is an empty line in Microsoft Dynamics NAV, the document number is not incremented on the journal. This problem occurs on the following journals:
  • Item journals
  • BOM journals
  • Job journals
  • Fixed assets journals
  • Insurance journals
  • Whse. journals
  • Resource journals
This problem occurs in the following products:
  • Microsoft Dynamics NAV 2009 Service Pack 1
  • Microsoft Dynamics NAV 2009
  • Microsoft Dynamics NAV 5.0 Service Pack 1

↑ Back to the top


Cause

This problem occurs because the LastDocNo2 variable is initialized incorrectly when an empty line is created in the journal line.

↑ Back to the top


Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.


↑ Back to the top




Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
  • The Modify permission for the object that you will be changing.
  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.


Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:
  1. Change the code in the Code function in the Item Jnl.-Post Batch codeunit (23) as follows:
    Existing code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(ItemJnlBatch."No. Series","Posting Date",FALSE));

    // Delete the following line.
    LastDocNo2 := "Document No.";
    // End of the line.

    MakeRecurringTexts(ItemJnlLine);
    IF "Posting No. Series" = '' THEN
    ...
    Replacement code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(ItemJnlBatch."No. Series","Posting Date",FALSE));

    // Add the following lines.
    IF NOT EmptyLine THEN
    LastDocNo2 := "Document No.";
    // End of the lines.

    MakeRecurringTexts(ItemJnlLine);
    IF "Posting No. Series" = '' THEN
    ...
  2. Change the code in the Code function in the BOM Jnl.-Post Batch codeunit (33) as follows:
    Existing code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(BOMJnlBatch."No. Series","Posting Date",FALSE));

    // Delete the following line.
    LastDocNo2 := "Document No.";
    // End of the line.

    MakeRecurringTexts(BOMJnlLine);
    IF "Posting No. Series" = '' THEN
    ...
    Replacement code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(BOMJnlBatch."No. Series","Posting Date",FALSE));

    // Add the following lines.
    IF NOT EmptyLine THEN
    LastDocNo2 := "Document No.";
    // End of the lines.

    MakeRecurringTexts(BOMJnlLine);
    IF "Posting No. Series" = '' THEN
    ...
  3. Change the code in the Code function in the Res. Jnl.-Post Batch codeunit (213) as follows:
    Existing code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(ResJnlBatch."No. Series","Posting Date",FALSE));

    // Delete the following line.
    LastDocNo2 := "Document No.";
    // End of the line.

    MakeRecurringTexts(ResJnlLine);
    IF "Posting No. Series" = '' THEN
    ...
    Replacement code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(ResJnlBatch."No. Series","Posting Date",FALSE));

    // Add the following lines.
    IF NOT EmptyLine THEN
    LastDocNo2 := "Document No.";
    // End of the lines.

    MakeRecurringTexts(ResJnlLine);
    IF "Posting No. Series" = '' THEN
    ...
  4. Change the code in the Code function in the Job Jnl.-Post Batch codeunit (1013) as follows:
    Existing code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(JobJnlBatch."No. Series","Posting Date",FALSE));

    // Delete the following line.
    LastDocNo2 := "Document No.";
    // End of the line.

    MakeRecurringTexts(JobJnlLine);
    IF "Posting No. Series" = '' THEN BEGIN
    ...
    Replacement code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(JobJnlBatch."No. Series","Posting Date",FALSE));

    // Add the following lines.
    IF NOT EmptyLine THEN
    LastDocNo2 := "Document No.";
    // End of the lines.

    MakeRecurringTexts(JobJnlLine);
    IF "Posting No. Series" = '' THEN BEGIN
    ...
  5. Change the code in the Code function in the FA Jnl.-Post Batch codeunit (5633) as follows:
    Existing code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(FAJnlBatch."No. Series","FA Posting Date",FALSE));

    // Delete the following line.
    LastDocNo2 := "Document No.";;
    // End of the line.

    MakeRecurringTexts(FAJnlLine);
    IF "Posting No. Series" = '' THEN
    ...
    Replacement code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(FAJnlBatch."No. Series","FA Posting Date",FALSE));

    // Add the following lines.
    IF NOT ("FA No." = '') THEN
    LastDocNo2 := "Document No.";;
    // End of the lines.

    MakeRecurringTexts(FAJnlLine);
    IF "Posting No. Series" = '' THEN
    ...
  6. Change the code in the Code function in the Insurance Jnl.-Post Batch codeunit (5653) as follows:
    Existing code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(InsuranceJnlBatch."No. Series","Posting Date",FALSE));

    // Delete the following line.
    LastDocNo2 := "Document No.";
    // End of the line.

    IF "Posting No. Series" = '' THEN
    "Posting No. Series" := InsuranceJnlBatch."No. Series"
    ...
    Replacement code
    ...
    THEN
    TESTFIELD("Document No.",NoSeriesMgt.GetNextNo(InsuranceJnlBatch."No. Series","Posting Date",FALSE));

    // Add the following lines.
    IF NOT ("Insurance No." = '') THEN
    LastDocNo2 := "Document No.";
    // End of the lines.

    IF "Posting No. Series" = '' THEN
    "Posting No. Series" := InsuranceJnlBatch."No. Series"
    ...
  7. Change the code in the Code function in the Whse. Jnl.-Register Batch codeunit (7304) as follows:
    Existing code
    ...
    TESTFIELD("Whse. Document No.",
    NoSeriesMgt.GetNextNo(WhseJnlBatch."No. Series","Registering Date",FALSE));

    // Delete the following line.
    LastDocNo2 := "Whse. Document No.";
    // End of the line.

    IF "Registering No. Series" = '' THEN
    "Registering No. Series" := WhseJnlBatch."No. Series"
    ...
    Replacement code
    ...
    TESTFIELD("Whse. Document No.",
    NoSeriesMgt.GetNextNo(WhseJnlBatch."No. Series","Registering Date",FALSE));

    // Add the following lines.
    IF NOT EmptyLine THEN
    LastDocNo2 := "Whse. Document No.";
    // End of the lines.

    IF "Registering No. Series" = '' THEN
    "Registering No. Series" := WhseJnlBatch."No. Series"
    ...

Prerequisites

You must have one of the following products installed to apply this hotfix:
  • Microsoft Dynamics NAV 2009 Service Pack 1
  • Microsoft Dynamics NAV 2009
  • Microsoft Dynamics NAV 5.0 Service Pack 1

Removal information

You cannot remove this hotfix.

↑ Back to the top


Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

↑ Back to the top


Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

↑ Back to the top


Keywords: kbmbsinventory, kbnotautohotfix, kbsurveynew, kbmbscodefix, kbqfe, kbmbsquickpub, kbnoloc, kbmbspartner, kb, kbmbsmigrate

↑ Back to the top

Article Info
Article ID : 2250508
Revision : 2
Created on : 9/20/2018
Published on : 9/20/2018
Exists online : False
Views : 304