Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

XADM: Cannot Install Key Management Server in Site


View products that this article applies to.

This article was previously published under Q196161

↑ Back to the top


Symptoms

When you attempt to install Key Management (KM) Server in a site that may already have had KM Server installed in it, the following error message may be displayed:
WARNING! There is already a KM Server installed in this Site on server servername.
There can only be one KM Server per site. You must remove the existing KM Server before you can install a new one.
If you click OK, Key Manager does not complete the installation on the server.

↑ Back to the top


Cause

The server named in the error message was either removed from the site, or KM Server was installed on it and was not properly removed by the Setup program.

↑ Back to the top


Workaround

To work around this problem:

WARNING: If you use the raw mode of the Exchange Server Administrator program (admin /r) incorrectly, serious problems may occur that may require you to reinstall Microsoft Windows NT Server, Microsoft Exchange Server, or both. Microsoft cannot guarantee that problems that result from using raw mode incorrectly can be solved. Use raw mode at your own risk.
  1. Make sure you have a backup copy of a directory in the site.
  2. Start the Exchange Server Administrator program in raw mode. At a command prompt type the following:
    c:\exchsrvr\bin\admin.exe /r
  3. Click to open the Site container of the site that you want to install KM Server to, then click the Configuration container.
  4. Click the CA object, and on the Edit menu, click Delete RAW Object.
  5. Click the Site Encryption Configuration object under the Configuration object, and open File, Raw Properties (press SHIFT+ENTER).
  6. On the Object Attributes menu, click KM-Server.
  7. In the Edit Value list, click the Distinguished Name for the server that was named in the error message that had KM Server installed on it at one time.

    For example:
    /o=Organization/ou=Site/cn=Configuration/cn=Servers/cn=SERVERNAME
  8. Press the DELETE key, and then click Remove so that both the Edit value and Attribute value are blank.
  9. Click OK.
  10. Close the Exchange Server Administrator program in RAW Mode.
  11. Proceed with the KM Server setup.

↑ Back to the top


More information

This article assumes that you do not have a backup of your advanced security data and that you want to install and use the KM Server with new security information.

↑ Back to the top


Keywords: KB196161, kbprb

↑ Back to the top

Article Info
Article ID : 196161
Revision : 7
Created on : 10/28/2006
Published on : 10/28/2006
Exists online : False
Views : 282