Microsoft KB Archive Search

Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

  1. Home
  2. Printing Wide Carriage with Generic/Text Only Print Driver

Printing Wide Carriage with Generic/Text Only Print Driver

Summary

When you use the built in Generic/Text Only print driver to print, the driver defaults to 80 columns. Sometimes, it is necessary to use the Generic/Text Only driver to print 132 or more columns.

↑ Back to the top

More Information

You can use the following steps to make the Generic/Text Only print driver default to 132 or more columns:


  1. Click Start, point to Setting, and then click Printers.
  2. On the File menu, click Server Properties, and then click the Forms tab.
  3. Click Create a New Form and enter Wide132 for the Form Description.
  4. Adjust the measurements as follows:



    • Under Paper Size, make the Width 13.2in (or wider if you require more columns) and the Height 11.68in.
    • Under Printer Area Margins, leave the margins at zero.
  5. Click Save Form, and then click OK when complete.
  6. Right-click the Generic/Text Only Printer, select Document Defaults, and then click the Advanced tab.
  7. Under Paper Output, click Paper Size, and then select Wide132 from the list at the bottom.
  8. Click OK when complete.
This procedure will save Wide132 as the selected paper size for the Generic/Text Only printer.

↑ Back to the top

Keywords: kb, kbinfo

↑ Back to the top

Article Info
Article ID : 184057
Revision : 5
Created on : 8/19/2020
Published on : 8/20/2020
Exists online : False
Views : 135