Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

Bind: Can't Assign Requested Address from Ftp.exe Using Winsock Proxy


View products that this article applies to.

This article was previously published under Q164395

↑ Back to the top


Symptoms

When you use Ftp.exe from either a Microsoft Windows NT Server or a Microsoft Windows 95 client while it is configured to use the Winsock Proxy, you may get the following error message:
Bind: Can't assign requested address.

↑ Back to the top


Cause

This can be caused by one of the following reasons:

  • The IP address of the external interface of the Proxy Server is in the Local Address Table (LAT).

    -OR-
  • The Proxy Server has one network interface and only one IP address.

↑ Back to the top


Workaround

Remove any references to external IP addresses from the LAT on the Proxy Server.

↑ Back to the top


More information

If the IP address of an external interface on the Proxy Server is in the LAT, it is considered by the proxy client to be internal. Because the client computer does not have an interface with the same IP address as the external IP address of the Proxy Server, you get the above error message.

↑ Back to the top


Keywords: kbprb, KB164395

↑ Back to the top

Article Info
Article ID : 164395
Revision : 1
Created on : 4/30/2001
Published on : 4/30/2001
Exists online : False
Views : 488