Microsoft KB Archive Search

Notice: This website is an unofficial Microsoft Knowledge Base (hereinafter KB) archive and is intended to provide a reliable access to deleted content from Microsoft KB. All KB articles are owned by Microsoft Corporation. Read full disclaimer for more details.

  1. Home
  2. You can change the "Routing No." value in a production order line unexpectedly after you posted the production journal for the production order line in Microsoft Dynamics NAV 2009

You can change the "Routing No." value in a production order line unexpectedly after you posted the production journal for the production order line in Microsoft Dynamics NAV 2009

View products that this article applies to.

This article applies to Microsoft Dynamics NAV for all countries and all language locales.

↑ Back to the top

Symptoms

You can unexpectedly change the value in the Routing No. field in a production order line unexpectedly after you posted the production journal for the production order line in Microsoft Dynamics NAV 2009. This problem occurs in the following products:
  • Microsoft Dynamics NAV 2009 R2
  • Microsoft Dynamics NAV 2009 Service Pack 1

↑ Back to the top

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

↑ Back to the top



Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:
  • The Modify permission for the object that you will be changing.
  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.


Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:
  1. Change the code in the Properties section in the Prod. Order Line table (5406) as follows:
    Existing code 1
    ...
    ItemLedgEntry@1000 : Record 32;
    CapLedgEntry@1001 : Record 5832;
    BEGIN
    IF Status = Status::Finished THEN
    ...
    Replacment code 1
    ...
    ItemLedgEntry@1000 : Record 32;
    CapLedgEntry@1001 : Record 5832;

    // Add the following line.
    PurchLine@1002 : Record 39;

    BEGIN
    IF Status = Status::Finished THEN
    ...
    Existing code 2
    ...
    TABLECAPTION,"Line No.",ItemLedgEntry.TABLECAPTION);

    // Delete the following lines.
    CapLedgEntry.SETCURRENTKEY("Prod. Order No.","Prod. Order Line No.");
    CapLedgEntry.SETRANGE("Prod. Order No.","Prod. Order No.");
    CapLedgEntry.SETRANGE("Prod. Order Line No.","Line No.");
    IF CapLedgEntry.FIND('-') THEN
    ERROR(
    Text99000000,
    TABLECAPTION,"Line No.",CapLedgEntry.TABLECAPTION);
    // End of the lines.

    END;
    ...
    Replacement code 2
    ...
    TABLECAPTION,"Line No.",ItemLedgEntry.TABLECAPTION);

    // Add the following lines.
    IF CheckCapLedgEntry THEN
    ERROR(
    Text99000000,
    TABLECAPTION,"Line No.",CapLedgEntry.TABLECAPTION);
    IF CheckSubcontractPurchOrder THEN
    ERROR(
    Text99000000,
    TABLECAPTION,"Line No.",PurchLine.TABLECAPTION);
    // End of the lines.

    END;
    ...
  2. Change the code in the Fields section in the Prod. Order Line table (5406) as follows:
    Existing code 
    ...
    }
    { 61 ; ;Routing No. ;Code20 ;TableRelation="Routing Header".No.;

    // Delete the following lines.
    OnValidate=BEGIN
    "Routing Version Code" := '';
    ProdOrderLine.SETRANGE(Status,Status);
    ProdOrderLine.SETRANGE("Prod. Order No.","Prod. Order No.");
    ProdOrderLine.SETRANGE("Routing No.",xRec."Routing No.");
    ProdOrderLine.SETFILTER("Line No.",'<>%1',"Line No.");
    IF NOT ProdOrderLine.FIND('-') THEN BEGIN
    ProdOrderRtngLine.SETRANGE(Status,Status);
    ProdOrderRtngLine.SETRANGE("Prod. Order No.","Prod. Order No.");
    ProdOrderRtngLine.SETRANGE("Routing No.",xRec."Routing No.");
    ProdOrderRtngLine.DELETEALL(TRUE);
    END;
    // End of the lines.

    IF "Routing No." = '' THEN
    EXIT;
    ...
    Replacement code
    ...
    }
    { 61 ; ;Routing No. ;Code20 ;TableRelation="Routing Header".No.;

    // Add the following lines.
    OnValidate=VAR
    CapLedgEntry@1000 : Record 5832;
    PurchLine@10001 : Record 39;
    BEGIN
    "Routing Version Code" := '';
    IF "Routing No." <> xRec."Routing No." THEN BEGIN
    IF CheckCapLedgEntry THEN
    ERROR(
    Text99000004,
    FIELDCAPTION("Routing No."),xRec."Routing No.",CapLedgEntry.TABLECAPTION);
    IF CheckSubcontractPurchOrder THEN
    ERROR(
    Text99000004,
    FIELDCAPTION("Routing No."),xRec."Routing No.",PurchLine.TABLECAPTION);
    END;
    // End of the lines.

    IF "Routing No." = '' THEN
    EXIT;
    ...
  3. Change the code in the Global Variables section in the Prod. Order Line table (5406) as follows:
    Existing code
    ...
    Text99000002@1002 : TextConst 'ENU=You cannot change %1 when %2 is %3.';
    Text99000003@1003 : TextConst 'ENU=Change %1 from %2 to %3?';
    Item@1004 : Record 27;
    SKU@1021 : Record 5700;
    ...
    Replacement code
    ...
    Text99000002@1002 : TextConst 'ENU=You cannot change %1 when %2 is %3.';
    Text99000003@1003 : TextConst 'ENU=Change %1 from %2 to %3?';

    // Add the following line.
    Text99000004@1035 : TextConst 'ENU=You cannot modify %1 %2 because there exists at least one %3 associated with it.';

    Item@1004 : Record 27;
    SKU@1021 : Record 5700;
    ...
  4. Change the code in the CheckCapLedgEntry function in the Prod. Order Line table (5406) as follows:
    Existing code
    ...
    END;
    BEGIN
    END.
    ...
    Replacement code
    ...
    END;

    // Add the following lines.
    LOCAL PROCEDURE CheckCapLedgEntry@1002() : Boolean;
    VAR
    CapLedgEntry@1001 : Record 5832;
    BEGIN
    CapLedgEntry.SETCURRENTKEY("Prod. Order No.","Prod. Order Line No.");
    CapLedgEntry.SETRANGE("Prod. Order No.","Prod. Order No.");
    CapLedgEntry.SETRANGE("Prod. Order Line No.","Line No.");
    EXIT(NOT CapLedgEntry.ISEMPTY);
    END;
    LOCAL PROCEDURE CheckSubcontractPurchOrder@1003() : Boolean;
    VAR
    PurchLine@1001 : Record 39;
    BEGIN
    PurchLine.SETCURRENTKEY(
    "Document Type",Type,"Prod. Order No.","Prod. Order Line No.","Routing No.","Operation No.");
    PurchLine.SETRANGE("Document Type",PurchLine."Document Type"::Order);
    PurchLine.SETRANGE(Type,PurchLine.Type::Item);
    PurchLine.SETRANGE("Prod. Order No.","Prod. Order No.");
    PurchLine.SETRANGE("Prod. Order Line No.","Line No.");
    (NOT PurchLine.ISEMPTY);
    END;
    // End of the lines.

    BEGIN
    END.
    ...

Prerequisites

You must have one of the following products installed to apply this hotfix:
  • Microsoft Dynamics NAV 2009 R2
  • Microsoft Dynamics NAV 2009 Service Pack 1

Removal information

You cannot remove this hotfix.

↑ Back to the top

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

↑ Back to the top

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

↑ Back to the top

Keywords: kbqfe, kbmbspartner, kbmbsmigrate, kbmbsquickpub, kbsurveynew, kbnoloc, kbmbscodefix, kb

↑ Back to the top

Article Info
Article ID : 2777578
Revision : 1
Created on : 1/7/2017
Published on : 12/13/2012
Exists online : False
Views : 293